Valid

JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General (English PDF)

电线电缆绞线设备 技术要求 第1部分:一般规定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5818.1-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 5818.1-2008 is the English-translated version of 电线电缆绞线设备 技术要求 第1部分:一般规定.

JB/T 5818.1-2008 is the general part of a recommended Chinese machinery industry standard on the technical requirements for stranding equipment for wires and cables.

The requirements it states are the general ones, and they are to be applied in the design, the manufacture, the inspection and the identification of stranding equipment of all types for wires and cables.

The part replaces the 1991 edition, JB/T 5818.1-1991. It is classified K13 in the Chinese standard classification.

Found what you need?

Document preview — JB/T 5818.1-2008

National Standard of the People's Republic of China

Replacing
JB/T 5818.1-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 5818.1-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 5818.1-1991.

It is one of 7 parts of the JB/T 5818 series.

2 Scope Preview

This standard is the general part of a recommended Chinese machinery industry standard on the technical requirements for stranding equipment for wires and cables. The requirements it states are the general ones, and they are to be applied in the design, the manufacture, the inspection and the identification of stranding equipment of all types for wires and cables. The part replaces the 1991 edition, JB/T 5818.1-1991. It is classified K13 in the Chinese standard classification.

JB/T 5818.1-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB/T 2900.40

GB/T 4457.2

GB/T 4457.4

GB/T 4457.5

GB/T 4458.1

GB/T 4458.2

GB/T 4458.3

GB/T 4458.4

GB/T 4458.5

GB/T 4458.6

GB/T 4459.1

GB/T 4459.2

GB/T 4459.3

GB/T 4459.4

GB/T 4459.5

GB/T 4459.7

GB/T 4459.8

GB/T 4459.9

GB/T 4460

GB/T 4728.1

GB/T 4728.2

GB/T 4728.3

GB/T 4728.4

GB/T 4728.5

GB/T 4728.6

GB/T 4728.7

GB/T 4728.8

GB/T 4728.9

GB/T 4728.10

GB/T 4728.11

GB/T 4728.12

GB/T 4728.13

GB/T 13384

JB/T 4015.1

JB/T 4015.2

JB/T 4015.3

JB/T 4015.4

JB/T 4015.5

JB/T 4015.6

JB/T 4032.1

JB/T 4032.2

JB/T 4032.3

JB/T 4032.4

JB/T 4033.1

JB/T 4033.2

JB/T 4033.3

JB/T 4033.4

JB/T 4033.5

JB/T 5814.3

JB/T 5817.1

JB/T 5817.2

JB/T 5817.3

JB/T 5817.4

JB/T 7600.1

JB/T 7600.2

JB/T 7600.3

JB/T 7600.4

JB/T 7600.5

JB/T 7601.1

JB/T 7601.2-2008 — Special equipment for electric wires and cables - Basic technical requirements - Part 2: Inspection and acceptance

JB/T 7601.3

JB/T 7601.4-2008 — Special equipment for electric wires and cables - Basic technical requirements - Part 4: Weldments

JB/T 7601.5

JB/T 7601.6

JB/T 7601.7

JB/T 7601.8

JB/T 7601.9

JB/T 7601.10

JB/T 7601.11

JB/T 8137.1

JB/T 8137.2

JB/T 8137.3

JB/T 8137.4

JB/T 8997.1

JB/T 8997.2

JB/T 8997.3

JB/T 8997.4

4 Where this standard sits

It cites 77 standards, among them JB/T 7601.2-2008, JB/T 7601.4-2008, listed in full above.

It is one part of the JB/T 5818 series, of which this catalogue holds 7 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 5818.2-1991 — Wire and cable stranding equipment technical requirements - Part 2: Stranded equipment

JB/T 5818.2-2008 — Part 2: Bunching machines

JB/T 5818.3-1991 — Wire and cable stranding equipment technical requirements - Part 3: Pipe cutter device

JB/T 5818.3-2008 — Part 3: Tubular stranding machines

JB/T 5818.4-1991 — Wire and cable stranding equipment technical requirements - Part 4: cage stranding equipment

JB/T 5818.4-2008 — Part 4: Cage stranding machines

Other editions:

JB/T 5818.1-1991 (earlier edition)

Standards on related subjects:

JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester

GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables

GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring

7 Classification and status

Chinese Standard Classification (CCS): K 13

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

Editions of JB/T 5818.1

EditionTitleRevisionStatus
JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: Generalcurrent editionCurrent
JB/T 5818.1-1991Stranding machines for wires and cables - Technical requirements - Part 1: Generalprevious editionSuperseded

This page sells the current edition, JB/T 5818.1-2008. Earlier editions are listed for reference only.

How to Download JB/T 5818.1-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5818.1-2008

$85.00