JB/T 5817.1-2008Stranding machines for wires and cables - Types and sizes - Part 1: General (English PDF)
电线电缆绞线设备 型式尺寸 第1部分:一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5817.1-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 5817.1-2008 is the English-translated version of 电线电缆绞线设备 型式尺寸 第1部分:一般规定.
JB/T 5817.1-2008 is the general part of a recommended Chinese machinery industry standard on the types and sizes of stranding equipment for wires and cables.
It states the type and size provisions in their general form, and those provisions are to be used in the design, the manufacture, the inspection and the identification of stranding equipment of every type for wires and cables.
The part replaces the 1991 edition, JB/T 5817.1-1991. It is filed at K13 in the Chinese standard classification.
Found what you need?
Document preview — JB/T 5817.1-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 5817.1-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5817.1-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 5817.1-1991.
It is one of 7 parts of the JB/T 5817 series.
2 Scope Preview
This standard is the general part of a recommended Chinese machinery industry standard on the types and sizes of stranding equipment for wires and cables. It states the type and size provisions in their general form, and those provisions are to be used in the design, the manufacture, the inspection and the identification of stranding equipment of every type for wires and cables. The part replaces the 1991 edition, JB/T 5817.1-1991. It is filed at K13 in the Chinese standard classification.
JB/T 5817.1-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 321
GB/T 2900.40
4 Where this standard sits
It cites 2 standards, listed in full above.
It is one part of the JB/T 5817 series, of which this catalogue holds 7 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5817.2-1991 — Wire and cable stranding equipment - Types and dimensions
JB/T 5817.2-2008 — Part 2: Bunching machines
JB/T 5817.3-1991 — Wire and cable stranding equipment type size - Part 3: Pipe cutter device
JB/T 5817.3-2008 — Part 3: Tubular stranding machines
JB/T 5817.4-1991 — Wire and cable stranding equipment type size - Part 4: cage stranding equipment
JB/T 5817.4-2008 — Part 4: Cage stranding machines
Other editions:
JB/T 5817.1-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
7 Classification and status
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 26171-2025Inspection methods for special equipment of electric wire and cable
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
- JB/T 5818.2-2008Stranding machines for wires and cables - Technical requirements - Part 2: Bunching machines
- JB/T 5818.3-2008Stranding machines for wires and cables - Technical requirements - Part 3: Tubular stranding machines
- JB/T 5818.4-2008Stranding machines for wires and cables - Technical requirements - Part 4: Cage stranding machines
Similar standards
Editions of JB/T 5817.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5817.1-2008 | Stranding machines for wires and cables - Types and sizes - Part 1: General | current edition | Current |
| JB/T 5817.1-1991 | Stranding machines for wires and cables - Types and sizes - Part 1: General | previous edition | Superseded |
This page sells the current edition, JB/T 5817.1-2008. Earlier editions are listed for reference only.
How to Download JB/T 5817.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
GB/T 321-1980 — Preferred numbers and preferred number series
GB/T 321-2005 — Preferred numbers -- Series of preferred numbers
JB/T 5817.1-2008
$55.00