JB/T 5817.3-2008Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines (English PDF)
电线电缆绞线设备 型式尺寸 第3部分:管绞设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5817.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 5817.3-2008 is the English-translated version of 电线电缆绞线设备 型式尺寸 第3部分:管绞设备.
JB/T 5817.3-2008 is the tubular stranding part of a recommended Chinese machinery industry standard on the types and sizes of stranding equipment for wires and cables.
The types and sizes it fixes are those of the tubular stranding machines used on wire and cable conductors, and the provisions serve the design, the manufacture, the inspection and the identification of those machines. In the Chinese standard classification it is filed at K13.
Found what you need?
Document preview — JB/T 5817.3-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 5817.3-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5817.3-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 5817.3-1991.
It is one of 7 parts of the JB/T 5817 series.
2 Scope Preview
This standard is the tubular stranding part of a recommended Chinese machinery industry standard on the types and sizes of stranding equipment for wires and cables. The types and sizes it fixes are those of the tubular stranding machines used on wire and cable conductors, and the provisions serve the design, the manufacture, the inspection and the identification of those machines. In the Chinese standard classification it is filed at K13.
JB/T 5817.3-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
JB/T 4015.1
JB/T 4015.2
JB/T 4015.3
JB/T 4015.4
JB/T 4015.5
JB/T 4015.6
JB/T 4032.1
JB/T 4032.2
JB/T 4032.3
JB/T 4032.4
JB/T 7600.1
JB/T 7600.2
JB/T 7600.3
JB/T 7600.4
JB/T 7600.5
JB/T 8137.1
JB/T 8137.2
JB/T 8137.3
JB/T 8137.4
JB/T 8997.1
JB/T 8997.2
JB/T 8997.3
JB/T 8997.4
4 Where this standard sits
It cites 23 standards, listed in full above.
It is one part of the JB/T 5817 series, of which this catalogue holds 7 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5817.1-1991 — Wire and cable stranding equipment - Types and dimensions
JB/T 5817.1-2008 — Part 1: General
JB/T 5817.2-1991 — Wire and cable stranding equipment - Types and dimensions
JB/T 5817.2-2008 — Part 2: Bunching machines
JB/T 5817.4-1991 — Wire and cable stranding equipment type size - Part 4: cage stranding equipment
JB/T 5817.4-2008 — Part 4: Cage stranding machines
Other editions:
JB/T 5817.3-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
7 Classification and status
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- JB/T 4015.1Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 1: General requirements
- JB/T 4015.2Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 2: Pillar type pay-off and take-up
- JB/T 4015.3Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 3: Travelling crane type pay-off and take-up
- JB/T 4015.4Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 4: Sliding guide track type pay-off and take-up
- JB/T 4015.5Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 5: Cabinet type take-up
- JB/T 4015.6Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 6: Static type pay-off
Similar standards
Editions of JB/T 5817.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5817.3-2008 | Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines | current edition | Current |
| JB/T 5817.3-1991 | Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines | previous edition | Superseded |
This page sells the current edition, JB/T 5817.3-2008. Earlier editions are listed for reference only.
How to Download JB/T 5817.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4015.1-1999 — Adaptable units of wire and cable machinery pay-off and take-up. Part 1: General requirements
JB/T 4015.1-2013 — Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 1: General requirements
JB/T 4015.2-1999 — Adaptable units of wire and cable machinery pay-off and take-up. Part 2: Pillar type pay-off and take-up
JB/T 5817.3-2008
$85.00