JB/T 8997.1-2013Machine spools with large bore for processing of wires and cables - Part 1: General (English PDF)
电线电缆大孔径机用线盘 第1部分：一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8997.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 8997.1-2013 is the English-translated version of 电线电缆大孔径机用线盘 第1部分：一般规定.
JB/T 8997.1-2013 opens a recommended Chinese machinery industry series on machine spools with large bore for the processing of wires and cables, and it holds the general provisions.
It covers the models, the materials and the specifications of these large bore machine spools, and then their technical requirements, acceptance criteria and test methods, down to packaging and marking.
The spools it deals with are those used in the production of wires and cables. Among the standards it quotes are GB 912, GB/T 2900.10, GB/T 3274, JB/T 7601.2 and JB/T 7601.6.
It replaces JB/T 8997.1-1999; Chinese classification K13, international classification 29.060.01.
Found what you need?
Document preview — JB/T 8997.1-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 8997.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 8997.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 4 parts of the JB/T 8997 series.
2 Scope
JB/T 8997.1-2013 opens a recommended Chinese machinery industry series on machine spools with large bore for the processing of wires and cables, and it holds the general provisions. It covers the models, the materials and the specifications of these large bore machine spools, and then their technical requirements, acceptance criteria and test methods, down to packaging and marking. The spools it deals with are those used in the production of wires and cables. Among the standards it quotes are GB 912, GB/T 2900.10, GB/T 3274, JB/T 7601.2 and JB/T 7601.6. It replaces JB/T 8997.1-1999; Chinese classification K13, international classification 29.060.01.
3 Normative references
JB/T 8997.1-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 912
GB/T 2900.10
GB/T 2900.40
GB/T 3274
JB/T 7601.2
JB/T 7601.4
JB/T 7601.6
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8997.2-2013 — Part 2: Machine spools with welded steel plate
JB/T 8997.3-2013 — Part 3: Common machine spools with stamped steel plate
JB/T 8997.4-2013 — Part 4: Reinforced machine spools with stamped steel plate
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 912[GB/T 912-2008] Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
- GB/T 2900.10Electrotechnical terminology -- Electric cables
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 3274Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
- JB/T 7601.2Special equipment for electric wires and cables - Basic technical requirements - Part 2: Inspection and acceptance
- JB/T 7601.4Special equipment for electric wires and cables - Basic technical requirements - Part 4: Weldments
Cited by
- JB/T 8997.2-2013Machine spools with large bore for processing of wires and cables - Part 2: Machine spools with welded steel plate
- JB/T 8997.3-2013Machine spools with large bore for processing of wires and cables - Part 3: Common machine spools with stamped steel plate
- JB/T 8997.4-2013Machine spools with large bore for processing of wires and cables - Part 4: Reinforced machine spools with stamped steel plate
- JB/T 10903.1-2008Cabling machines for wires and cables - Types and dimensions - Part 1: General
- JB/T 10903.2-2008Cabling machines for wires and cables - Types and dimensions - Part 2: Core bunching machines
- JB/T 10903.3-2008Cabling machines for wires and cables - Types and dimensions - Part 3: Bow-type cabling machines
Similar standards
Editions of JB/T 8997.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8997.1-2013 | Machine spools with large bore for processing of wires and cables - Part 1: General | current edition | Current |
| JB/T 8997.1-1999 | Machine spools with large bore for processing of wires and cables - Part 1: General | previous edition | Superseded |
This page sells the current edition, JB/T 8997.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 8997.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 912-2008 — [GB/T 912-2008] Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
GB/T 2900.10-2013 — Electrotechnical terminology -- Electric cables
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
Secure payment via Stripe
Payments accepted
JB/T 8997.1-2013
$209.00