JB/T 10903.2-2008Cabling machines for wires and cables - Types and dimensions - Part 2: Core bunching machines (English PDF)
电线电缆成缆设备 型式尺寸 第2部分:缆芯束绞设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10903.2-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10903.2-2008 is the English-translated version of 电线电缆成缆设备 型式尺寸 第2部分:缆芯束绞设备.
Part 2 of the types and dimensions standard for wire and cable cabling machines is JB/T 10903.2-2008, a recommended Chinese machinery industry document. The machines it singles out are those that bunch and strand the cable core, and for them it specifies type and size.
The figures it gives are declared applicable to the design, manufacture, inspection and identification of core bunching equipment used in wire and cable production.
It quotes GB/T 2900.40 along with JB/T 8997.1, JB/T 8997.2, JB/T 8997.3 and JB/T 8997.4. Its classification codes are K13 in the Chinese system and 29.060.01 in the international one.
Found what you need?
Document preview — JB/T 10903.2-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10903.2-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It is one of 5 parts of the JB/T 10903 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Part 2 of the types and dimensions standard for wire and cable cabling machines is JB/T 10903.2-2008, a recommended Chinese machinery industry document. The machines it singles out are those that bunch and strand the cable core, and for them it specifies type and size. The figures it gives are declared applicable to the design, manufacture, inspection and identification of core bunching equipment used in wire and cable production. It quotes GB/T 2900.40 along with JB/T 8997.1, JB/T 8997.2, JB/T 8997.3 and JB/T 8997.4. Its classification codes are K13 in the Chinese system and 29.060.01 in the international one.
JB/T 10903.2-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.40
JB/T 8997.1
JB/T 8997.4
JB/T 8997.3
JB/T 8997.2
4 Where this standard sits
It cites 5 standards, listed in full above.
It is one part of the JB/T 10903 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 10903.1-2008 — Part 1: General
JB/T 10903.3-2008 — Part 3: Bow-type cabling machines
JB/T 10903.4-2008 — Part 4: Cage-type cabling machines
JB/T 10903.5-2008 — Part 5: Drum twisting cabling machines
Standards on related subjects:
GB/T 9330-2020 — Plastic insulated control cables
JB/T 10696.9-2011 — Test methods for mechanical, physical and chemical properties of electric cables and wires - Part 9: Termite test
GB/T 12528-2008 — Rail vehicle cables with rated voltages up to and including 3kV
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- JB/T 8997.1Machine spools with large bore for processing of wires and cables - Part 1: General
- JB/T 8997.4Machine spools with large bore for processing of wires and cables - Part 4: Reinforced machine spools with stamped steel plate
- JB/T 8997.3Machine spools with large bore for processing of wires and cables - Part 3: Common machine spools with stamped steel plate
- JB/T 8997.2Machine spools with large bore for processing of wires and cables - Part 2: Machine spools with welded steel plate
Similar standards
How to Download JB/T 10903.2-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 8997.1-1999 — Machine spools with large bore for processing of electric wires and cables. Part 1: General requirements
JB/T 8997.1-2013 — Machine spools with large bore for processing of wires and cables - Part 1: General
JB/T 10903.2-2008
$55.00