JB/T 10903.4-2008Cabling machines for wires and cables - Types and dimensions - Part 4: Cage-type cabling machines (English PDF)
电线电缆成缆设备 型式尺寸 第4部分:笼式成缆设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10903.4-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10903.4-2008 is the English-translated version of 电线电缆成缆设备 型式尺寸 第4部分:笼式成缆设备.
Cage-type cabling machines are the subject of JB/T 10903.4-2008, Part 4 of the recommended Chinese machinery industry standard on the types and dimensions of cabling equipment for wires and cables.
For cage-type equipment it sets out the type designations and the sizes. The part states that these apply to cage-type machines used to strand the cable core, and covers their design, manufacture, acceptance and identification.
Among the standards it quotes are GB/T 2900.40, JB/T 4015, JB/T 4032, JB/T 4033 and JB/T 8997. It is classified as K13 in the Chinese system and as 29.060.01 internationally.
Found what you need?
Document preview — JB/T 10903.4-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10903.4-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It is one of 5 parts of the JB/T 10903 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Cage-type cabling machines are the subject of JB/T 10903.4-2008, Part 4 of the recommended Chinese machinery industry standard on the types and dimensions of cabling equipment for wires and cables. For cage-type equipment it sets out the type designations and the sizes. The part states that these apply to cage-type machines used to strand the cable core, and covers their design, manufacture, acceptance and identification. Among the standards it quotes are GB/T 2900.40, JB/T 4015, JB/T 4032, JB/T 4033 and JB/T 8997. It is classified as K13 in the Chinese system and as 29.060.01 internationally.
JB/T 10903.4-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.40
JB/T 4015
JB/T 4032
JB/T 4033
JB/T 7600
JB/T 8137
JB/T 8997
4 Where this standard sits
It cites 7 standards, listed in full above.
It is one part of the JB/T 10903 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 10903.1-2008 — Part 1: General
JB/T 10903.2-2008 — Part 2: Core bunching machines
JB/T 10903.3-2008 — Part 3: Bow-type cabling machines
JB/T 10903.5-2008 — Part 5: Drum twisting cabling machines
Standards on related subjects:
GB/T 9330-2020 — Plastic insulated control cables
JB/T 10696.9-2011 — Test methods for mechanical, physical and chemical properties of electric cables and wires - Part 9: Termite test
GB/T 12528-2008 — Rail vehicle cables with rated voltages up to and including 3kV
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
JB/T 4015 · JB/T 4032 · JB/T 4033 · JB/T 7600 · JB/T 8137 · JB/T 8997
Similar standards
How to Download JB/T 10903.4-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 4015.1-1999 — Adaptable units of wire and cable machinery pay-off and take-up. Part 1: General requirements
JB/T 4015.1-2013 — Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 1: General requirements
JB/T 10903.4-2008
$105.00