JB/T 7601.6-2008Special equipment for electric wires and cables - Basic technical requirements - Part 6: Machining (English PDF)
电线电缆专用设备 基本技术要求 第6部分:机械加工
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7601.6-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 7601.6-2008 is the English-translated version of 电线电缆专用设备 基本技术要求 第6部分:机械加工.
JB/T 7601.6-2008, a recommended Chinese machinery industry standard, is the sixth part of the basic technical requirements for equipment for electric wires and cables and treats machining.
It fixes the basic technical requirements and the inspection rules for the machining of the products, components and parts of this equipment, and its declared field of application is the machining of wire and cable equipment products.
Among the standards quoted in it are GB/T 1095, GB/T 1184-1996, GB/T 1804, GB/T 6403.4 and GB/T 12359. It replaces JB/T 7601.6-1994. The Chinese classification given for it is K13 and the international classification 29.060.01, and it comes from the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 7601.6-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 7601.6-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7601.6-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 7601.6-1994.
It is one of 21 parts of the JB/T 7601 series.
2 Scope Preview
JB/T 7601.6-2008, a recommended Chinese machinery industry standard, is the sixth part of the basic technical requirements for equipment for electric wires and cables and treats machining. It fixes the basic technical requirements and the inspection rules for the machining of the products, components and parts of this equipment, and its declared field of application is the machining of wire and cable equipment products. Among the standards quoted in it are GB/T 1095, GB/T 1184-1996, GB/T 1804, GB/T 6403.4 and GB/T 12359. It replaces JB/T 7601.6-1994. The Chinese classification given for it is K13 and the international classification 29.060.01, and it comes from the Ministry of Industry and Information Technology.
JB/T 7601.6-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 3
GB/T 145
GB/T 196
GB/T 1095
GB/T 1096
GB/T 1097
GB/T 1098
GB/T 1099.1
GB/T 1144
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1415
GB/T 1563
GB/T 1564
GB/T 1565
GB/T 1568
GB/T 1804
GB/T 2516
GB/T 4458.4-2003 — Mechanical drawings--Dimensioning
GB/T 5796.3
GB/T 6403.4
GB/T 7306.2
GB/T 7307
GB/T 7306.1
GB/T 12359
4 Where this standard sits
It cites 24 standards, among them GB/T 1184-1996, GB/T 4458.4-2003, listed in full above.
It is one part of the JB/T 7601 series, of which this catalogue holds 21 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 7601.1-1994 — Special equipment for wires and cables - Basic technical requirements - Part 1: General provisions
JB/T 7601.1-2008 — Part 1: General
JB/T 7601.2-1994 — Special equipment for wires and cables - Basic technical requirements - Part 2: Inspection and acceptance
JB/T 7601.2-2008 — Part 2: Inspection and acceptance
JB/T 7601.3-1994 — Special equipment for wires and cables - Basic technical requirements - Part 3: Castings
JB/T 7601.3-2008 — Part 3: Castings
JB/T 7601.4-1994 — Special equipment for wires and cables - Basic technical requirements - Part 4: Weldments
JB/T 7601.4-2008 — Part 4: Weldments
JB/T 7601.5-1994 — Special equipment for wires and cables - Basic technical requirements - Part 5: Forgings
JB/T 7601.5-2008 — Part 5: Forgings
JB/T 7601.7-1994 — Special equipment for wires and cables - Basic technical requirements - Part 7: Heat treatment
JB/T 7601.7-2008 — Part 7: Heat treatment
JB/T 7601.8-1994 — Special equipment for wires and cables - Basic technical requirements - Part 8: Surface treatment
JB/T 7601.8-2008 — Part 8: Surface treatment
JB/T 7601.9-1994 — Special equipment for wires and cables - Basic technical requirements - Part 9: Assembly
JB/T 7601.9-2008 — Part 9: Assembly
JB/T 7601.10-1994 — Part 10: Electrical control devices
JB/T 7601.10-2008 — Part 10: Electrical control devices
JB/T 7601.11-1994 — Special equipment for wires and cables - Basic technical requirements - Part 11: Appearance quality
JB/T 7601.11-2008 — Part 11: Appearance quality
Other editions:
JB/T 7601.6-1994 (earlier edition)
Standards on related subjects:
GB/T 6995.4-2008 — Markings for electric wires and cables - Part 4: Identifications of insulated conductors of cables and wires for electrical appliances and equipments
GB/T 6995.5-2008 — Markings for electric wires and cables - Part 5: Identifications of insulated cores of power cables
JB/T 7829-2006 — Heat-shrinkable terminations for power cables with rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 28567-2022Technical requirements for special equipment of electric wire and cable
- JB/T 4033.1-2013Adaptable units for general use of wire and cable machinery - Lapper - Part 1: General requirements
- JB/T 8997.1-2013Machine spools with large bore for processing of wires and cables - Part 1: General
- GB/T 27998-2011Balance crane
- JB/T 5813-2008Enamelling machines for winding wires - Technical requirements
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
Similar standards
Editions of JB/T 7601.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7601.6-2008 | Special equipment for electric wires and cables - Basic technical requirements - Part 6: Machining | current edition | Current |
| JB/T 7601.6-1994 | Special equipment for electric wires and cables - Basic technical requirements - Part 6: Machining | previous edition | Superseded |
This page sells the current edition, JB/T 7601.6-2008. Earlier editions are listed for reference only.
How to Download JB/T 7601.6-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7601.6-2008
$135.00