JB/T 5820-2008Plastic extruding machines for wires and cables - Technical requirements (English PDF)
电线电缆挤塑设备 技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5820-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 5820-2008 is the English-translated version of 电线电缆挤塑设备 技术要求.
JB/T 5820-2008 is a recommended Chinese machinery industry standard stating the technical requirements for the plastic extruding equipment used on wires and cables.
The machines it covers are those extruding plastic insulation for wires and cables, the plastic sheath of cables or other structural elements made of plastic, and the requirements are written for their design, their manufacture, their acceptance and their identification.
The document supersedes the 1991 edition, JB/T 5820-1991, and the Ministry of Industry and Information Technology issued it. It is classified K13 in China and 29.060.01 internationally.
Found what you need?
Document preview — JB/T 5820-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 5820-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5820-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 5820-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard stating the technical requirements for the plastic extruding equipment used on wires and cables. The machines it covers are those extruding plastic insulation for wires and cables, the plastic sheath of cables or other structural elements made of plastic, and the requirements are written for their design, their manufacture, their acceptance and their identification. The document supersedes the 1991 edition, JB/T 5820-1991, and the Ministry of Industry and Information Technology issued it. It is classified K13 in China and 29.060.01 internationally.
JB/T 5820-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.40
GB/T 4457.2
GB/T 4457.4
GB/T 4457.5
GB/T 4458.1
GB/T 4458.2
GB/T 4458.3
GB/T 4458.4
GB/T 4458.5
GB/T 4458.6
GB/T 4459.1
GB/T 4459.2
GB/T 4459.3
GB/T 4459.4
GB/T 4459.5
GB/T 4459.6
GB/T 4459.7
GB/T 4460
GB/T 4728.1
GB/T 4728.2
GB/T 4728.3
GB/T 4728.4
GB/T 4728.5
GB/T 4728.6
GB/T 4728.7
GB/T 4728.8
GB/T 4728.9
GB/T 4728.10
GB/T 4728.11
GB/T 4728.12
GB/T 4728.13
GB/T 13384
JB/T 4015.1
JB/T 4015.2
JB/T 4015.3
JB/T 4015.4
JB/T 4015.5
JB/T 4015.6
JB/T 4032.1
JB/T 4032.2
JB/T 4032.3
JB/T 4032.4
JB/T 5814.5
JB/T 5819
JB/T 7600.1
JB/T 7600.2
JB/T 7600.3
JB/T 7600.4
JB/T 7600.5
JB/T 7601.1
JB/T 7601.2
JB/T 7601.3
JB/T 7601.4
JB/T 7601.5
JB/T 7601.6
JB/T 7601.7
JB/T 7601.8
JB/T 7601.9
JB/T 7601.10
JB/T 7601.11
JB/T 8137.1
JB/T 8137.2
JB/T 8137.3
JB/T 8137.4
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5820-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
JB/T 5814.1-2008 — Special equipment for electric wires and cables - Basic parameters - Part 1: General
JB/T 5813-2008 — Enamelling machines for winding wires - Technical requirements
JB/T 5812-2008 — Enamelling machines for winding wires - Types and dimensions
6 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 4457.2Technical drawing - Drawing presentation - General principles of leader lines and reference lines
- GB/T 4457.4Mechanical drawings -- General principles of presentation -- Lines
- GB/T 4457.5Mechanical drawings—Basic conventions for representing areas on cuts and sections
- GB/T 4458.1Mechanical drawings -- General principles of presentation -- Views
- GB/T 4458.2Mechanical drawings--Item references and its arrangement for assembling drawings
Similar standards
Editions of JB/T 5820
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5820-2008 | Plastic extruding machines for wires and cables - Technical requirements | current edition | Current |
| JB/T 5820-1991 | Plastic extruding machines for wires and cables - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 5820-2008. Earlier editions are listed for reference only.
How to Download JB/T 5820-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 5820-2008
$135.00