JB/T 4015.2-2013Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 2: Pillar type pay-off and take-up (English PDF)
电缆设备通用部件 收放线装置 第2部分：立柱式收放线装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4015.2-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 4015.2-2013 is the English-translated version of 电缆设备通用部件 收放线装置 第2部分：立柱式收放线装置.
JB/T 4015.2-2013 is the second part of the Chinese recommended standard on adaptable units for general use of wire and cable machinery and deals with the pillar type pay-off and take-up.
For this unit the standard gives the type, the sizes and the technical requirements. It is written for pillar type units used with the PNS machines defined in JB/T 7600, and its scope statement also refers to JB/T 8137.
The part replaces the earlier edition JB/T 4015.2-1999, quotes GB/T 2900.40, and is classified K13 in the Chinese system and 29.060.01 in the international one. It was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 4015.2-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 4015.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 4015.2-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 6 parts of the JB/T 4015 series.
2 Scope
This standard is the second part of the Chinese recommended standard on adaptable units for general use of wire and cable machinery and deals with the pillar type pay-off and take-up. For this unit the standard gives the type, the sizes and the technical requirements. It is written for pillar type units used with the PNS machines defined in JB/T 7600, and its scope statement also refers to JB/T 8137. The part replaces the earlier edition JB/T 4015.2-1999, quotes GB/T 2900.40, and is classified K13 in the Chinese system and 29.060.01 in the international one.
3 Normative references
JB/T 4015.2-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2900.40
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4015.1-2013 — Part 1: General requirements
JB/T 4015.3-2013 — Part 3: Travelling crane type pay-off and take-up
JB/T 4015.4-2013 — Part 4: Sliding guide track type pay-off and take-up
JB/T 4015.5-2013 — Part 5: Cabinet type take-up
JB/T 4015.6-2013 — Part 6: Static type pay-off
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- JB/T 10903.3-2008Cabling machines for wires and cables - Types and dimensions - Part 3: Bow-type cabling machines
- JB/T 5817.3-2008Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines
- JB/T 5817.4-2008Stranding machines for wires and cables - Types and sizes - Part 4: Cage stranding machines
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
- JB/T 5820-2008Plastic extruding machines for wires and cables - Technical requirements
Similar standards
Editions of JB/T 4015.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4015.2-2013 | Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 2: Pillar type pay-off and take-up | current edition | Current |
| JB/T 4015.2-1999 | Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 2: Pillar type pay-off and take-up | previous edition | Superseded |
This page sells the current edition, JB/T 4015.2-2013. Earlier editions are listed for reference only.
How to Download JB/T 4015.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 4015.3-2013 — Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 3: Travelling crane type pay-off and take-up
JB/T 4015.1-2013 — Adaptable units for general use of wire and cable machinery - Pay-off and take-up - Part 1: General requirements
Secure payment via Stripe
Payments accepted
JB/T 4015.2-2013
$229.00