JB/T 4032.1-2013Adaptable units for general use of wire and cable machinery - Haul-off - Part 1: General requirements (English PDF)
电缆设备通用部件 牵引装置 第1部分：基本技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4032.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 4032.1-2013 is the English-translated version of 电缆设备通用部件 牵引装置 第1部分：基本技术要求.
The first part of the Chinese recommended standard on adaptable units for general use of wire and cable machinery, JB/T 4032.1-2013, sets the general requirements for haul-off devices.
It states the basic technical requirements that a haul-off has to meet as a general-purpose component of cable-making equipment, and it applies to haul-off units of every type used in that equipment.
The document replaces the earlier edition JB/T 4032.1-1999 and is classified K13 in the Chinese system and 29.060.01 in the international one. Among the standards it quotes are GB/T 231, GB/T 2900.40, GB/T 4457.2, GB/T 4457.4, GB/T 4457.5, several parts of GB/T 4458 and GB/T 4459, and GB/T 4460. It was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 4032.1-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 4032.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 4032.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 4 parts of the JB/T 4032 series.
2 Scope
The first part of the Chinese recommended standard on adaptable units for general use of wire and cable machinery, JB/T 4032.1-2013, sets the general requirements for haul-off devices. It states the basic technical requirements that a haul-off has to meet as a general-purpose component of cable-making equipment, and it applies to haul-off units of every type used in that equipment. The document replaces the earlier edition JB/T 4032.1-1999 and is classified K13 in the Chinese system and 29.060.01 in the international one. Among the standards it quotes are GB/T 231, GB/T 2900.40, GB/T 4457.2, GB/T 4457.4, GB/T 4457.5, several parts of GB/T 4458 and GB/T 4459, and GB/T 4460.
3 Normative references
JB/T 4032.1-2013 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 231
GB/T 2900.40
GB/T 4457.2
GB/T 4457.4
GB/T 4457.5
GB/T 4458.1
GB/T 4458.2
GB/T 4458.3
GB/T 4458.4
GB/T 4458.5
GB/T 4458.6
GB/T 4459.1
GB/T 4459.2
GB/T 4459.3
GB/T 4459.4
GB/T 4459.5
GB/T 4459.7
GB/T 4459.8
GB/T 4459.9
GB/T 4460
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4032.2-2013 — Part 2: Wheel haul-off
JB/T 4032.3-2013 — Part 3: Caterpillar haul-off
JB/T 4032.4-2013 — Part 4: Wheel and belt haul-off
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 4457.2Technical drawing - Drawing presentation - General principles of leader lines and reference lines
- GB/T 4457.4Mechanical drawings -- General principles of presentation -- Lines
- GB/T 4457.5Mechanical drawings—Basic conventions for representing areas on cuts and sections
- GB/T 4458.1Mechanical drawings -- General principles of presentation -- Views
- GB/T 4458.2Mechanical drawings--Item references and its arrangement for assembling drawings
GB/T 231
Cited by
- JB/T 10903.3-2008Cabling machines for wires and cables - Types and dimensions - Part 3: Bow-type cabling machines
- JB/T 5817.3-2008Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines
- JB/T 5817.4-2008Stranding machines for wires and cables - Types and sizes - Part 4: Cage stranding machines
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
- JB/T 5819-2008Plastic extruding machines for wires and cables - Types and sizes
- JB/T 5820-2008Plastic extruding machines for wires and cables - Technical requirements
Similar standards
Editions of JB/T 4032.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4032.1-2013 | Adaptable units for general use of wire and cable machinery - Haul-off - Part 1: General requirements | current edition | Current |
| JB/T 4032.1-1999 | Adaptable units for general use of wire and cable machinery - Haul-off - Part 1: General requirements | previous edition | Superseded |
This page sells the current edition, JB/T 4032.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 4032.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 231.1-2018 — Metallic materials - Brinell hardness test - Part 1: Test method
GB/T 231.2-2022 — Metallic materials—Brinell hardness test—Part 2: Verification and calibration of testing machines
GB/T 231.3-2022 — Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
Secure payment via Stripe
Payments accepted
JB/T 4032.1-2013
$149.00