JB/T 4032.4-2013Adaptable units for general use of wire and cable machinery - Haul-off - Part 4: Wheel and belt haul-off (English PDF)
电缆设备通用部件 牵引装置 第4部分：轮带式牵引装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4032.4-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 4032.4-2013 is the English-translated version of 电缆设备通用部件 牵引装置 第4部分：轮带式牵引装置.
JB/T 4032.4-2013 is the fourth part of the Chinese recommended standard on adaptable units for general use of wire and cable machinery and concerns the wheel and belt haul-off.
For this unit the standard fixes the type, the sizes and the technical requirements. It applies to belted wheel haul-off units used as general-purpose components of cable-making equipment.
The part supersedes the earlier edition JB/T 4032.4-1999, carries the Chinese classification K13 and the international classification 29.060.01, and was issued by the Ministry of Industry and Information Technology.
The documents it cites are GB/T 1184-1996, GB/T 1801, GB/T 1804, GB/T 2900.40, GB/T 10095.1-2008 and GB/T 10095.2-2008.
Found what you need?
Document preview — JB/T 4032.4-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 4032.4-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 4032.4-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 4032.4-1999, carries the Chinese classification K13 and the international classification 29.060.01, and was issued by the Ministry of Industry and Information Technology. The documents it cites are GB/T 1184-1996, GB/T 1801, GB/T 1804, GB/T 2900.40, GB/T 10095.1-2008 and GB/T 10095.2-2008.
It is one of 4 parts of the JB/T 4032 series.
2 Scope
This standard is the fourth part of the Chinese recommended standard on adaptable units for general use of wire and cable machinery and concerns the wheel and belt haul-off. For this unit the standard fixes the type, the sizes and the technical requirements. It applies to belted wheel haul-off units used as general-purpose components of cable-making equipment. The part supersedes the earlier edition JB/T 4032.4-1999, carries the Chinese classification K13 and the international classification 29.060.01, and was issued by the Ministry of Industry and Information Technology. The documents it cites are GB/T 1184-1996, GB/T 1801, GB/T 1804, GB/T 2900.40, GB/T 10095.1-2008 and GB/T 10095.2-2008.
3 Normative references
JB/T 4032.4-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1801
GB/T 1804
GB/T 2900.40
GB/T 10095.1-2008
GB/T 10095.2-2008
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4032.1-2013 — Part 1: General requirements
JB/T 4032.2-2013 — Part 2: Wheel haul-off
JB/T 4032.3-2013 — Part 3: Caterpillar haul-off
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 10095.1-2008Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- GB/T 10095.2-2008Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
GB/T 1801
Cited by
- JB/T 10903.3-2008Cabling machines for wires and cables - Types and dimensions - Part 3: Bow-type cabling machines
- JB/T 5817.3-2008Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines
- JB/T 5817.4-2008Stranding machines for wires and cables - Types and sizes - Part 4: Cage stranding machines
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
- JB/T 5819-2008Plastic extruding machines for wires and cables - Types and sizes
- JB/T 5820-2008Plastic extruding machines for wires and cables - Technical requirements
Similar standards
Editions of JB/T 4032.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4032.4-2013 | Adaptable units for general use of wire and cable machinery - Haul-off - Part 4: Wheel and belt haul-off | current edition | Current |
| JB/T 4032.4-1999 | Adaptable units for general use of wire and cable machinery - Haul-off - Part 4: Wheel and belt haul-off | previous edition | Superseded |
This page sells the current edition, JB/T 4032.4-2013. Earlier editions are listed for reference only.
How to Download JB/T 4032.4-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
Secure payment via Stripe
Payments accepted
JB/T 4032.4-2013
$149.00