Valid

JB/T 7601.11-2008Special equipment for electric wires and cables - Basic technical requirements - Part 11: Appearance quality (English PDF)

电线电缆专用设备基本技术要求第11部分：外观质量

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7601.11-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 7601.11-2008 is the English-translated version of 电线电缆专用设备基本技术要求第11部分：外观质量.

JB/T 7601.11-2008 is the recommended Chinese machinery industry standard that forms Part 11 of the basic technical requirements for wire and cable equipment and is given to appearance quality.

The document states the general requirements for the appearance quality of this equipment, the test methods used to judge it and the inspection rules to be followed.

Those general appearance quality requirements for wire and cable equipment are what the standard applies to. Among the standards it quotes are GB/T 1720, GB/T 1731 and GB/T 9761.

The Ministry of Industry and Information Technology issued it in replacement of JB/T 7601.11-1994, under the Chinese classification K13 and the international classification 29.060.01.

Found what you need?

Document preview — JB/T 7601.11-2008

National Standard of the People's Republic of China

ICS: 29.060.01
Replacing: JB/T 7601.11-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references

1 Foreword

JB/T 7601.11-2008 was issued by MIIT on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 7601.11-1994.

It is one of 21 parts of the JB/T 7601 series.

2 Scope

This standard is the recommended Chinese machinery industry standard that forms Part 11 of the basic technical requirements for wire and cable equipment and is given to appearance quality. The document states the general requirements for the appearance quality of this equipment, the test methods used to judge it and the inspection rules to be followed. Those general appearance quality requirements for wire and cable equipment are what the standard applies to. Among the standards it quotes are GB/T 1720, GB/T 1731 and GB/T 9761. The Ministry of Industry and Information Technology issued it in replacement of JB/T 7601.11-1994, under the Chinese classification K13 and the international classification 29.060.01.

3 Normative references

JB/T 7601.11-2008 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 1720

GB/T 1728

GB/T 1731

GB/T 3181

GB/T 9761

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 7601.1-1994 — Special equipment for wires and cables - Basic technical requirements - Part 1: General provisions

JB/T 7601.1-2008 — Part 1: General

JB/T 7601.2-1994 — Special equipment for wires and cables - Basic technical requirements - Part 2: Inspection and acceptance

JB/T 7601.2-2008 — Part 2: Inspection and acceptance

JB/T 7601.3-1994 — Special equipment for wires and cables - Basic technical requirements - Part 3: Castings

JB/T 7601.3-2008 — Part 3: Castings

JB/T 7601.4-1994 — Special equipment for wires and cables - Basic technical requirements - Part 4: Weldments

JB/T 7601.4-2008 — Part 4: Weldments

JB/T 7601.5-1994 — Special equipment for wires and cables - Basic technical requirements - Part 5: Forgings

JB/T 7601.5-2008 — Part 5: Forgings

JB/T 7601.6-1994 — Special equipment for wires and cables - Basic technical requirements - Part 6: Machining

JB/T 7601.6-2008 — Part 6: Machining

JB/T 7601.7-1994 — Special equipment for wires and cables - Basic technical requirements - Part 7: Heat treatment

JB/T 7601.7-2008 — Part 7: Heat treatment

JB/T 7601.8-1994 — Special equipment for wires and cables - Basic technical requirements - Part 8: Surface treatment

JB/T 7601.8-2008 — Part 8: Surface treatment

JB/T 7601.9-1994 — Special equipment for wires and cables - Basic technical requirements - Part 9: Assembly

JB/T 7601.9-2008 — Part 9: Assembly

JB/T 7601.10-1994 — Part 10: Electrical control devices

JB/T 7601.10-2008 — Part 10: Electrical control devices

Other editions:

JB/T 7601.11-1994 (earlier edition)

6 Classification and status

International classification (ICS): 29.060.01

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Similar standards

JB/T 7601.1-2008|JB/T 7601.10-2008|JB/T 7601.2-2008|JB/T 7601.3-2008|JB/T 7601.4-2008|JB/T 7601.5-2008

Editions of JB/T 7601.11

Edition	Title	Revision	Status
JB/T 7601.11-2008	Special equipment for electric wires and cables - Basic technical requirements - Part 11: Appearance quality	current edition	Current
JB/T 7601.11-1994	Special equipment for electric wires and cables - Basic technical requirements - Part 11: Appearance quality	previous edition	Superseded

This page sells the current edition, JB/T 7601.11-2008. Earlier editions are listed for reference only.

How to Download JB/T 7601.11-2008

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.