JB/T 5818.3-2008Stranding machines for wires and cables - Technical requirements - Part 3: Tubular stranding machines (English PDF)
电线电缆绞线设备 技术要求 第3部分:管绞设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5818.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 5818.3-2008 is the English-translated version of 电线电缆绞线设备 技术要求 第3部分:管绞设备.
JB/T 5818.3-2008 is a recommended Chinese machinery industry standard that sets the technical requirements for the tubular stranding equipment used on wires and cables.
The equipment it applies to is identified by series: the JG series of tubular stranding machines working on wire and cable conductors. By its title the document is the tubular stranding part of the technical requirements for stranding equipment.
It supersedes the 1991 edition, JB/T 5818.3-1991. Its codes are K13 in the Chinese classification and 29.060.01 in the international one.
Found what you need?
Document preview — JB/T 5818.3-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 5818.3-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5818.3-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 5818.3-1991.
It is one of 7 parts of the JB/T 5818 series.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that sets the technical requirements for the tubular stranding equipment used on wires and cables. The equipment it applies to is identified by series: the JG series of tubular stranding machines working on wire and cable conductors. By its title the document is the tubular stranding part of the technical requirements for stranding equipment. It supersedes the 1991 edition, JB/T 5818.3-1991. Its codes are K13 in the Chinese classification and 29.060.01 in the international one.
JB/T 5818.3-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.40
JB/T 5814.3-2008 — Special equipment for electric wires and cables - Basic parameters - Part 3: Stranding machines
JB/T 5817.1
JB/T 5818.1
JB/T 7601.1
JB/T 7601.2
JB/T 7601.10
JB/T 7601.11
4 Where this standard sits
It cites 8 standards, among them JB/T 5814.3-2008, listed in full above.
It is one part of the JB/T 5818 series, of which this catalogue holds 7 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 5818.1-1991 — Wire and cable stranding equipment technical requirements - Part 1: General requirements
JB/T 5818.1-2008 — Part 1: General
JB/T 5818.2-1991 — Wire and cable stranding equipment technical requirements - Part 2: Stranded equipment
JB/T 5818.2-2008 — Part 2: Bunching machines
JB/T 5818.4-1991 — Wire and cable stranding equipment technical requirements - Part 4: cage stranding equipment
JB/T 5818.4-2008 — Part 4: Cage stranding machines
Other editions:
JB/T 5818.3-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- JB/T 5814.3-2008Special equipment for electric wires and cables - Basic parameters - Part 3: Stranding machines
- JB/T 5817.1Stranding machines for wires and cables - Types and sizes - Part 1: General
- JB/T 5818.1Stranding machines for wires and cables - Technical requirements - Part 1: General
- JB/T 7601.1Special equipment for electric wires and cables - Basic technical requirements - Part 1: General
- JB/T 7601.2Special equipment for electric wires and cables - Basic technical requirements - Part 2: Inspection and acceptance
Similar standards
Editions of JB/T 5818.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5818.3-2008 | Stranding machines for wires and cables - Technical requirements - Part 3: Tubular stranding machines | current edition | Current |
| JB/T 5818.3-1991 | Stranding machines for wires and cables - Technical requirements - Part 3: Tubular stranding machines | previous edition | Superseded |
This page sells the current edition, JB/T 5818.3-2008. Earlier editions are listed for reference only.
How to Download JB/T 5818.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 5814.3-2008 — Special equipment for electric wires and cables - Basic parameters - Part 3: Stranding machines
JB/T 5817.1-1991 — Wire and cable stranding equipment - Types and dimensions
JB/T 5818.3-2008
$105.00