GB/T 9761-2008Paints and varnishes -- Visual comparison of the colour of paints (English PDF)
色漆和清漆 色漆的目视比色
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for GB/T 9761-2008 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
May 14, 2008
Implementation date
October 1, 2008
Scope
GB/T 9761-2008 is the English-translated version of 色漆和清漆 色漆的目视比色.
GB/T 9761-2008 — This standard is one of the series of standards for paints, varnishes and sampling and testing of related products.
This standard specifies a color coating paints and related products - Visual colorimetric method, the sample is compared with standard samples, standard samples may Preparation of new reference standard plate or a standard board, the pilot can be compared or under artificial light in color box under natural daylight.
If you do not agree in advance on the lighting conditions and viewing conditions, this standard does not apply to contain special effect pigments such as metallic paint coating Comparison of color film.
Found what you need?
Document preview — GB/T 9761-2008
National Standard of the People's Republic of China
- ICS
- 87.040
- Classification
- G 50
- Replacing
- GB/T 9761-1988
Issued by: Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 5 Colorimetric lighting conditions
- 5.1 General
Foreword
This standard is equivalent to international standards ISO 3668:1998 "Paints and varnishes paints --- visual colorimetric" (in English).
This standard replaces GB/T 9761-1988 "Paints and varnishes - Visual comparison of color." the previous version of Standard GB/T 9761-1988 main technical differences are as follows.
--- 1988 Edition system equivalent to ISO 3668. 1976;
--- Assess the quality of different methods of artificial light;
--- Different than the color box inside painted desired color representation;
--- Check whether the observer with color vision defects different methods;
--- Increase the size of the test plate, and increases for larger test panels use a colorimetric gray shroud formed to meet the requirements of the viewing area content;
--- Increased levels of chromatic aberration evaluation and representation.
This standard Annex A, Annex B is normative appendix, Appendix C is informative appendix.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee paint pigment.
This standard was drafted. in the construction of Changzhou coating Chemical Research Institute, Kunshan City Shiming Technology Development Co., Ltd.
1 Scope
This standard is one of the series of standards for paints, varnishes and sampling and testing of related products.
This standard specifies a color coating paints and related products - Visual colorimetric method, the sample is compared with standard samples, standard samples may Preparation of new reference standard plate or a standard board, the pilot can be compared or under artificial light in color box under natural daylight.
If you do not agree in advance on the lighting conditions and viewing conditions, this standard does not apply to contain special effect pigments such as metallic paint coating Comparison of color film.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 9271 Paints and varnishes - Standard panels for (GB/T 9271-1988, eqv ISO 1514. 1984) GB/T 9278 paint sample conditioning and testing temperature and humidity (GB/T 9278-2008, ISO 3270. 1984, Paintsand varnishesandtheirrawmaterials-Temperaturesandhumiditiesforconditioningandtesting, IDT) GB/T 11186.1 coating color measurement method Part 1. Principles (GB/T 11186.1-1989, eqv ISO 7724-1.
1984, Paintsandvarnishes-Colorimetry-Part 1. Principles) GB/T 11186.2 coating color measurement method Part II. Color Measurement (GB/T 11186.2-1989, eqv ISO 7724-2. 1984, Paintsandvarnishes-Colorimetry-Part 2. Colourmeasurement) GB/T 11186.3 coating color measurement method Part 3. Calculation of color differences (GB/T 11186.3-1989, eqv ISO 7724-3. 1984, Paintsandvarnishes-Colorimetry-Part 3. Calculationofcolour) GB/T 13452.2 Paints and varnishes - Determination of film thickness (GB/T 13452.2-2008, ISO 2808:2007, IDT) CIE51.2.1999 colorimetric system with daylight simulation quality evaluation method Principle 3 Comparison of the paint film was observed to be the color under specified lighting conditions and viewing conditions, or under artificial lighting in natural sunlight , And if colorimetric under artificial light, will have to use colorimetric box. It represents the color component (hue, saturation, lightness) may be predetermined One method, for example, the use of specific rating methods described can also be considered metamerism assessment methods.
Supplementary information needed 4 for any particular application, the test methods specified in this standard needs to improve with additional information. Supplementary information in the accompanying content A record listed.
5 Colorimetric lighting conditions
5.1 General
For routine colorimetric, you can use natural sunlight or artificial light. The nature of natural daylight is unstable, and the judgment of the observer Susceptible to colored objects around, so for arbitration colorimetric, shall be subject to strict control of artificial light, the observer should wear neutral colors GB/T 9761-2008/ISO 3668:1998
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 9271Paints and varnishes standard panels for testing
- GB/T 9271-1988Paints and varnishes standard panels for testing
- GB/T 9278Temperatures and humidity for conditioning and testing of paint specimens
- GB/T 9278-2008Temperatures and humidity for conditioning and testing of paint specimens
- GB/T 13452.2Paints and varnishes -- Determination of film thickness
- GB/T 13452.2-2008Paints and varnishes -- Determination of film thickness
ISO 1514 · ISO 3270 · GB/T 11186.1 · GB/T 11186.1-1989 · ISO 7724 · GB/T 11186.2 · GB/T 11186.2-1989 · GB/T 11186.3 · GB/T 11186.3-1989 · ISO 2808
Cited by
- GB/T 23444-2024Metal and metal-composite ceilings
- GB/T 6822-2024Anti-fouling and anti-corrosive paint systems on ship hulls
- GB/T 4893.8-2023Test of surface coatings of furniture - Part 8: Determination of resistance to abrasion
- GB/T 40512-2021Test method of exposure to weathering for motor vehicle
- GB/T 26036-2020Aluminum alloy die forgings for automobile wheels
- GB/T 22649-2019Aluminium and aluminium alloys foil for container
How to Download GB/T 9761-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13452.2-2008 — Paints and varnishes -- Determination of film thickness
GB/T 9271-2008 — Paints and varnishes standard panels for testing
GB/T 9278-2008 — Temperatures and humidity for conditioning and testing of paint specimens
Secure payment via Stripe
Payments accepted
GB/T 9761-2008
$65.00