JB/T 10904.3-2008Cabling machines for wires and cables - Technical requirements - Part 3: Bow-type cabling machines (English PDF)
电线电缆成缆设备 技术要求 第3部分:弓型成缆设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10904.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10904.3-2008 is the English-translated version of 电线电缆成缆设备 技术要求 第3部分:弓型成缆设备.
JB/T 10904.3-2008 carries the technical requirements for bow-type cabling machines, as Part 3 of a recommended Chinese machinery industry standard on cabling equipment for wires and cables.
What it specifies are the technical requirements for bow-type equipment of this kind. The machines it is written for are the CG series, used to strand the cable core in wire and cable production.
Among the standards it quotes are GB/T 2900.40, JB/T 5814.4, JB/T 7601.2, JB/T 7601.10 and JB/T 10904.1. The catalogue records the Chinese classification code K13 and the international classification 29.060.01 for it.
Found what you need?
Document preview — JB/T 10904.3-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10904.3-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It is one of 5 parts of the JB/T 10904 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 10904.3-2008 carries the technical requirements for bow-type cabling machines, as Part 3 of a recommended Chinese machinery industry standard on cabling equipment for wires and cables. What it specifies are the technical requirements for bow-type equipment of this kind. The machines it is written for are the CG series, used to strand the cable core in wire and cable production. Among the standards it quotes are GB/T 2900.40, JB/T 5814.4, JB/T 7601.2, JB/T 7601.10 and JB/T 10904.1. The catalogue records the Chinese classification code K13 and the international classification 29.060.01 for it.
JB/T 10904.3-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.40
JB/T 5814.4
JB/T 7601.1
JB/T 7601.2
JB/T 7601.10
JB/T 7601.11
JB/T 10904.1
4 Where this standard sits
It cites 7 standards, listed in full above.
It is one part of the JB/T 10904 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 10904.1-2008 — Part 1: General
JB/T 10904.2-2008 — Part 2: Core bunching machines
JB/T 10904.4-2008 — Part 4: Cage type cabling machines
JB/T 10904.5-2008 — Part 5: Drum twisting machines
Standards on related subjects:
GB/T 9330-2020 — Plastic insulated control cables
JB/T 10696.9-2011 — Test methods for mechanical, physical and chemical properties of electric cables and wires - Part 9: Termite test
GB/T 12528-2008 — Rail vehicle cables with rated voltages up to and including 3kV
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- JB/T 5814.4Special equipment for electric wires and cables - Basic parameters - Part 4: Cabling machines
- JB/T 7601.1Special equipment for electric wires and cables - Basic technical requirements - Part 1: General
- JB/T 7601.2Special equipment for electric wires and cables - Basic technical requirements - Part 2: Inspection and acceptance
- JB/T 7601.10Special equipment for electric wires and cables - Basic technical requirements - Part 10: Electrical control devices
- JB/T 7601.11Special equipment for electric wires and cables - Basic technical requirements - Part 11: Appearance quality
Similar standards
How to Download JB/T 10904.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 10904.1-2008 — Cabling machines for wires and cables - Technical requirements - Part 1: General
JB/T 5814.4-1991 — Wire and cable equipment basic parameters - Part 4: cabling equipment
JB/T 10904.3-2008
$105.00