JB/T 10904.1-2008Cabling machines for wires and cables - Technical requirements - Part 1: General (English PDF)
电线电缆成缆设备 技术要求 第1部分:一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10904.1-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10904.1-2008 is the English-translated version of 电线电缆成缆设备 技术要求 第1部分:一般规定.
JB/T 10904.1-2008 is a recommended Chinese machinery industry standard giving the technical requirements for cabling machines used on wires and cables, and it is the part titled General.
The requirements it states are the overall ones for equipment of this kind. They are declared to apply to all types of wire and cable cabling equipment, and to cover design, manufacture, inspection and identification.
Among the standards it quotes are GB/T 2900.40, GB/T 4457.2, GB/T 4458.1, GB/T 13384 and JB/T 10903. The catalogue places it in class K13 of the Chinese classification and under the international classification 29.060.01, with the Ministry of Industry and Information Technology as issuing agency.
Found what you need?
Document preview — JB/T 10904.1-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10904.1-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It is one of 5 parts of the JB/T 10904 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the technical requirements for cabling machines used on wires and cables, and it is the part titled General. The requirements it states are the overall ones for equipment of this kind. They are declared to apply to all types of wire and cable cabling equipment, and to cover design, manufacture, inspection and identification. Among the standards it quotes are GB/T 2900.40, GB/T 4457.2, GB/T 4458.1, GB/T 13384 and JB/T 10903. The catalogue places it in class K13 of the Chinese classification and under the international classification 29.060.01, with the Ministry of Industry and Information Technology as issuing agency.
JB/T 10904.1-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2900.40
GB/T 4457.2
GB/T 4457.4
GB/T 4458.1
GB/T 4458.2
GB/T 4458.3
GB/T 4458.4
GB/T 4458.5
GB/T 4458.6
GB/T 4459.1
GB/T 4459.2
GB/T 4459.3
GB/T 4459.4
GB/T 4459.5
GB/T 4459.6
GB/T 4459.7
GB/T 4460
GB/T 4728.1
GB/T 4428.2
GB/T 4428.3
GB/T 4428.4
GB/T 4428.5
GB/T 4428.6
GB/T 4428.7
GB/T 4428.8
GB/T 4428.9
GB/T 4428.10
GB/T 4428.11
GB/T 4428.12
GB/T 4428.13
GB/T 13384
JB/T 4015
JB/T 4032
JB/T 4033
JB/T 5814.4
JB/T 7600
JB/T 7601
JB/T 8137
KB/T 8997
JB/T 10903
4 Where this standard sits
It cites 40 standards, listed in full above.
It is one part of the JB/T 10904 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 10904.2-2008 — Part 2: Core bunching machines
JB/T 10904.3-2008 — Part 3: Bow-type cabling machines
JB/T 10904.4-2008 — Part 4: Cage type cabling machines
JB/T 10904.5-2008 — Part 5: Drum twisting machines
Standards on related subjects:
GB/T 9330-2020 — Plastic insulated control cables
JB/T 10696.9-2011 — Test methods for mechanical, physical and chemical properties of electric cables and wires - Part 9: Termite test
GB/T 12528-2008 — Rail vehicle cables with rated voltages up to and including 3kV
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 4457.2Technical drawing - Drawing presentation - General principles of leader lines and reference lines
- GB/T 4457.4Mechanical drawings -- General principles of presentation -- Lines
- GB/T 4458.1Mechanical drawings -- General principles of presentation -- Views
- GB/T 4458.2Mechanical drawings--Item references and its arrangement for assembling drawings
- GB/T 4458.3Mechanical drawings—Axonometric drawings
GB/T 4428.2 · GB/T 4428.3 · GB/T 4428.4 · GB/T 4428.5 · GB/T 4428.6 · GB/T 4428.7 · GB/T 4428.8 · GB/T 4428.9 · GB/T 4428.10 · GB/T 4428.11 · GB/T 4428.12 · GB/T 4428.13 · JB/T 4015 · JB/T 4032 · JB/T 4033 · JB/T 7600 · JB/T 7601 · JB/T 8137 · KB/T 8997 · JB/T 10903
Cited by
- JB/T 10904.2-2008Cabling machines for wires and cables - Technical requirements - Part 2: Core bunching machines
- JB/T 10904.3-2008Cabling machines for wires and cables - Technical requirements - Part 3: Bow-type cabling machines
- JB/T 10904.4-2008Cabling machines for wires and cables - Technical requirements - Part 4: Cage type cabling machines
Similar standards
How to Download JB/T 10904.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
JB/T 10904.1-2008
$105.00