JB/T 4033.1-2013Adaptable units for general use of wire and cable machinery - Lapper - Part 1: General requirements (English PDF)
电缆设备通用部件 绕包装置 第1部分：基本技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4033.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 4033.1-2013 is the English-translated version of 电缆设备通用部件 绕包装置 第1部分：基本技术要求.
JB/T 4033.1-2013 opens the Chinese recommended standard on adaptable units for general use of wire and cable machinery with the general requirements for taping devices.
It lays down the basic technical requirements that these units have to meet as general-purpose components of cable-making equipment, and its field of use covers taping devices of every type used in such equipment.
The standard replaces the earlier edition JB/T 4033.1-1999 and is classified K13 in the Chinese system and 29.060.01 in the international one. It quotes GB/T 321, GB/T 2900.40, GB/T 4457.2, GB/T 4457.4, GB/T 4457.5, GB/T 13384 and JB/T 7601.1 to JB/T 7601.11, and it was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 4033.1-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 4033.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 4033.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 4 parts of the JB/T 4033 series.
2 Scope
JB/T 4033.1-2013 opens the Chinese recommended standard on adaptable units for general use of wire and cable machinery with the general requirements for taping devices. It lays down the basic technical requirements that these units have to meet as general-purpose components of cable-making equipment, and its field of use covers taping devices of every type used in such equipment. The standard replaces the earlier edition JB/T 4033.1-1999 and is classified K13 in the Chinese system and 29.060.01 in the international one. It quotes GB/T 321, GB/T 2900.40, GB/T 4457.2, GB/T 4457.4, GB/T 4457.5, GB/T 13384 and JB/T 7601.1 to JB/T 7601.11, and
3 Normative references
JB/T 4033.1-2013 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 321
GB/T 2900.40
GB/T 4457.2
GB/T 4457.4
GB/T 4457.5
GB/T 13384
JB/T 7601.1
JB/T 7601.2
JB/T 7601.3
JB/T 7601.4
JB/T 7601.5
JB/T 7601.6
JB/T 7601.7
JB/T 7601.8
JB/T 7601.9
JB/T 7601.10
JB/T 7601.11
GB/T 4458.1
GB/T 4458.2
GB/T 4458
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4033.2-2013 — Part 2: Normal type taping head
JB/T 4033.3-2013 — Part 3: Planar type taping head
JB/T 4033.4-2013 — Part 4: Semi-tangent type taping head
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 321Preferred numbers -- Series of preferred numbers
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 4457.2Technical drawing - Drawing presentation - General principles of leader lines and reference lines
- GB/T 4457.4Mechanical drawings -- General principles of presentation -- Lines
- GB/T 4457.5Mechanical drawings—Basic conventions for representing areas on cuts and sections
- GB/T 13384General specifications for packing of mechanical and electrical product
GB/T 4458
Similar standards
Editions of JB/T 4033.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4033.1-2013 | Adaptable units for general use of wire and cable machinery - Lapper - Part 1: General requirements | current edition | Current |
| JB/T 4033.1-1999 | Adaptable units for general use of wire and cable machinery - Lapper - Part 1: General requirements | previous edition | Superseded |
This page sells the current edition, JB/T 4033.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 4033.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 2900.40-1985 — Electrotechnical terminology--Machineryand equipment for electric wires and cables
GB/T 321-2005 — Preferred numbers -- Series of preferred numbers
Secure payment via Stripe
Payments accepted
JB/T 4033.1-2013
$149.00