JB/T 7601.9-2008Special equipment for electric wires and cables - Basic technical requirements - Part 9: Assembly (English PDF)
电线电缆专用设备 基本技术要求 第9部分:装配
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7601.9-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 7601.9-2008 is the English-translated version of 电线电缆专用设备 基本技术要求 第9部分:装配.
JB/T 7601.9-2008 is the recommended Chinese machinery industry standard covering Part 9, assembly, of the basic technical requirements for equipment for electric wires and cables.
It sets the basic technical requirements for the assembly process of this equipment, production equipment and test equipment alike, and applies to the general assembly of single machines and of complete sets.
Assembly under special requirements, as with precision instruments or equipment needing constant temperature, controlled humidity, freedom from vibration or from dust, is governed instead by the drawings, the technical documents and the purchasing agreement.
Among the standards it quotes are GB/T 3766, GB/T 10089, GB/T 11361 and several parts of JB/T 6756.
Found what you need?
Document preview — JB/T 7601.9-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 7601.9-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7601.9-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 7601.9-1994.
It is one of 21 parts of the JB/T 7601 series.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard covering Part 9, assembly, of the basic technical requirements for equipment for electric wires and cables. It sets the basic technical requirements for the assembly process of this equipment, production equipment and test equipment alike, and applies to the general assembly of single machines and of complete sets. Assembly under special requirements, as with precision instruments or equipment needing constant temperature, controlled humidity, freedom from vibration or from dust, is governed instead by the drawings, the technical documents and the purchasing agreement. Among the standards it quotes are GB/T 3766, GB/T 10089, GB/T 11361 and several parts of JB/T 6756.
JB/T 7601.9-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 3766
GB/T 7932
GB/T 10089
JB/T 6756.9
GB/T 10095.1
GB/T 10095.2
GB/T 10096
GB/T 11361
GB/T 11365
GB/T 15753
JB/T 6756.8
JB/T 7601.2
JB/T 6756.7
JB/T 6756.5
JB/T 6756.6
JB/T 6756.3
JB/T 6756.10
JB/T 6756.1
JB/T 6756.2
JB/T 6756.4
4 Where this standard sits
It cites 20 standards, listed in full above.
It is one part of the JB/T 7601 series, of which this catalogue holds 21 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 7601.1-1994 — Special equipment for wires and cables - Basic technical requirements - Part 1: General provisions
JB/T 7601.1-2008 — Part 1: General
JB/T 7601.2-1994 — Special equipment for wires and cables - Basic technical requirements - Part 2: Inspection and acceptance
JB/T 7601.2-2008 — Part 2: Inspection and acceptance
JB/T 7601.3-1994 — Special equipment for wires and cables - Basic technical requirements - Part 3: Castings
JB/T 7601.3-2008 — Part 3: Castings
JB/T 7601.4-1994 — Special equipment for wires and cables - Basic technical requirements - Part 4: Weldments
JB/T 7601.4-2008 — Part 4: Weldments
JB/T 7601.5-1994 — Special equipment for wires and cables - Basic technical requirements - Part 5: Forgings
JB/T 7601.5-2008 — Part 5: Forgings
JB/T 7601.6-1994 — Special equipment for wires and cables - Basic technical requirements - Part 6: Machining
JB/T 7601.6-2008 — Part 6: Machining
JB/T 7601.7-1994 — Special equipment for wires and cables - Basic technical requirements - Part 7: Heat treatment
JB/T 7601.7-2008 — Part 7: Heat treatment
JB/T 7601.8-1994 — Special equipment for wires and cables - Basic technical requirements - Part 8: Surface treatment
JB/T 7601.8-2008 — Part 8: Surface treatment
JB/T 7601.10-1994 — Part 10: Electrical control devices
JB/T 7601.10-2008 — Part 10: Electrical control devices
JB/T 7601.11-1994 — Special equipment for wires and cables - Basic technical requirements - Part 11: Appearance quality
JB/T 7601.11-2008 — Part 11: Appearance quality
Other editions:
JB/T 7601.9-1994 (earlier edition)
Standards on related subjects:
GB/T 6995.4-2008 — Markings for electric wires and cables - Part 4: Identifications of insulated conductors of cables and wires for electrical appliances and equipments
GB/T 6995.5-2008 — Markings for electric wires and cables - Part 5: Identifications of insulated cores of power cables
JB/T 7829-2006 — Heat-shrinkable terminations for power cables with rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)
7 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 7932Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB/T 10089Accuracy of cylindrical worm and wormwheel
- JB/T 6756.9Special equipment for electric wires and cables - Test methods - Part 9: QH series enamelling machines
- GB/T 10095.1Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- GB/T 10095.2Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
Cited by
- JB/T 4033.1-2013Adaptable units for general use of wire and cable machinery - Lapper - Part 1: General requirements
- JB/T 5813-2008Enamelling machines for winding wires - Technical requirements
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
- JB/T 5820-2008Plastic extruding machines for wires and cables - Technical requirements
Similar standards
Editions of JB/T 7601.9
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7601.9-2008 | Special equipment for electric wires and cables - Basic technical requirements - Part 9: Assembly | current edition | Current |
| JB/T 7601.9-1994 | Special equipment for electric wires and cables - Basic technical requirements - Part 9: Assembly | previous edition | Superseded |
This page sells the current edition, JB/T 7601.9-2008. Earlier editions are listed for reference only.
How to Download JB/T 7601.9-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10089-1988 — Accuracy of cylindrical worm and wormwheel
GB/T 10089-2018 — Accuracy of cylindrical worm and wormwheel
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 7601.9-2008
$135.00