JB/T 7600.3-2008PNS machine reels for electric wires and cables - Part 3: Pressed steel plate flanged machine reels (English PDF)
电线电缆PNS型机用线盘 第3部分：钢板冲压卷边机用线盘
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7600.3-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 7600.3-2008 is the English-translated version of 电线电缆PNS型机用线盘 第3部分：钢板冲压卷边机用线盘.
The recommended machinery industry standard JB/T 7600.3-2008 forms Part 3 of the Chinese rules for PNS machine reels used in wire and cable manufacture, and it treats reels made of stamped steel plate with a crimped flange.
It fixes the material, the types and the specifications of these reels, states their basic technical requirements and lists the test items to be carried out. The reels it addresses are the general and reinforced stamped types rated for maximum loads of 40 N/dm3 and 70 N/dm3.
GB/T 912, GB/T 3274 and JB/T 7600.1 are among the documents it quotes. The Ministry of Industry and Information Technology issued it under the Chinese classification code K13.
Found what you need?
Document preview — JB/T 7600.3-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 7600.3-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 7600.3-2008 was issued by MIIT on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 7600.3-1994.
It is one of 9 parts of the JB/T 7600 series.
2 Scope
The recommended machinery industry standard JB/T 7600.3-2008 forms Part 3 of the Chinese rules for PNS machine reels used in wire and cable manufacture, and it treats reels made of stamped steel plate with a crimped flange. It fixes the material, the types and the specifications of these reels, states their basic technical requirements and lists the test items to be carried out. The reels it addresses are the general and reinforced stamped types rated for maximum loads of 40 N/dm3 and 70 N/dm3. GB/T 912, GB/T 3274 and JB/T 7600.1 are among the documents it quotes. The Ministry of Industry and Information Technology issued it under the Chinese classification code K13.
3 Normative references
JB/T 7600.3-2008 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 912
GB/T 3274
JB/T 7600.1
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 7600.1-1994 — PNS series machine reels for wires and cables - Part 1: General provisions
JB/T 7600.1-2008 — Part 1: General
JB/T 7600.2-1994 — PNS series machine reels for wires and cables - Part 2: Welded steel plate machine reels
JB/T 7600.2-2008 — Part 2: Welded steel plate machine reels
JB/T 7600.4-1994 — PNS series machine reels for wires and cables - Part 4: Corrugated machine reels
JB/T 7600.4-2008 — Part 4: Corrugated machine reels
JB/T 7600.5-1994 — PNS series machine reels for wires and cables - Part 5: Plastic machine reels
JB/T 7600.5-2008 — Part 5: Plastic machine reels
Other editions:
JB/T 7600.3-1994 (earlier edition)
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3274Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
- JB/T 7600.1PNS machine reels for electric wires and cables - Part 1: General
GB/T 912
Cited by
- JB/T 10903.1-2008Cabling machines for wires and cables - Types and dimensions - Part 1: General
- JB/T 10903.3-2008Cabling machines for wires and cables - Types and dimensions - Part 3: Bow-type cabling machines
- JB/T 5814.1-2008Special equipment for electric wires and cables - Basic parameters - Part 1: General
- JB/T 5817.3-2008Stranding machines for wires and cables - Types and sizes - Part 3: Tubular stranding machines
- JB/T 5817.4-2008Stranding machines for wires and cables - Types and sizes - Part 4: Cage stranding machines
- JB/T 5818.1-2008Stranding machines for wires and cables - Technical requirements - Part 1: General
Similar standards
Editions of JB/T 7600.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7600.3-2008 | PNS machine reels for electric wires and cables - Part 3: Pressed steel plate flanged machine reels | current edition | Current |
| JB/T 7600.3-1994 | PNS machine reels for electric wires and cables - Part 3: Pressed steel plate flanged machine reels | previous edition | Superseded |
This page sells the current edition, JB/T 7600.3-2008. Earlier editions are listed for reference only.
How to Download JB/T 7600.3-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3274-2017 — Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
JB/T 7600.1-1994 — PNS series machine reels for wires and cables - Part 1: General provisions
JB/T 7600.1-2008 — PNS machine reels for electric wires and cables - Part 1: General
Secure payment via Stripe
Payments accepted
JB/T 7600.3-2008
$105.00