Valid

JB/T 5000.10-2007General technical requirements for heavy machinery - Part 10: Assembly (English PDF)

重型机械通用技术条件第10部分：装配

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5000.10-2007 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 28, 2007

Implementation date

February 1, 2008

Scope

JB/T 5000.10-2007 is the English-translated version of 重型机械通用技术条件第10部分：装配.

JB/T 5000.10-2007 is the Chinese standard "General technical requirements for heavy machinery - Part 10: Assembly".

Its scope clause reads: This Part of JB/T 5000 specifies the general technical conditions for the heavy machinery such as the general requirements for assembly, form and position tolerance of the assembly component, assembly connection method, typical component assembly, final assembly and trial run.

This Part is applicable to the assembly of heavy machinery products. Where no special requirements are stated in the product drawing, technical document or technical specifications for procurement, all shall meet those specified in this Part.

Found what you need?

Document preview — JB/T 5000.10-2007

National Standard of the People's Republic of China

Replacing: JB/T 5000.10-1998

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword i
1 Scope
2 Normative References
3 General Requirements for Assembly
4 Form and Position Tolerance of the Assembly Component
5 Assembly Connection Method
5.1 Screw and Bolt Connection
5.2 Pin Connection
5.3 Key Connection
5.4 Rivet Connection
5.5 Bonding Connection
5.6 Interference Connection
6 Typical Component Assembly
6.1 Rolling Bearing Assembly
6.2 Sliding Bearing Assembly
6.3 Gear and Gear Box Assembly
6.4 Assembly of Belt Wheel and Chain Drive
6.5 Coupling Assembly
6.6 Assembly of Brake and Clutch
6.7 Assembly of Hydraulic Cylinder, Cylinder and Sealing Member
6.8 Pipeline Assembling
7 Other
8 Final Assembly and Trial Run
Appendix A (Informative) Tightening Moment of General Connecting Bolt
Appendix C (Informative) Pressing Force Calculation Formula During the Press Assembly
Appendix D (Informative) Heating Temperature and Time Determination During the Hot Assembly
Appendix E (Informative) Cooling Temperature and Time Determination During the Cold Assembly

1 Scope

This Part of JB/T 5000 specifies the general technical conditions for the heavy machinery such as the general requirements for assembly, form and position tolerance of the assembly component, assembly connection method, typical component assembly, final assembly and trial run.

This Part is applicable to the assembly of heavy machinery products.

Where no special requirements are stated in the product drawing, technical document or technical specifications for procurement, all shall meet those specified in this Part.

2 Normative References

The following standards contain provisions which, through reference in this Part of JB/T 5000, constitute provisions of this Part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

JB/T 5945-2018|JB/T 5992.9-1992|JB/T 5000.1-2007|JB/T 5000.11-2007|JB/T 5000.12-2007|JB/T 5000.13-2007

Editions of JB/T 5000.10

Edition	Title	Revision	Status
JB/T 5000.10-2007	General technical requirements for heavy machinery - Part 10: Assembly	current edition	Current
JB/T 5000.10-1998	General technical requirements for heavy machinery - Part 10: Assembly	previous edition	Superseded

This page sells the current edition, JB/T 5000.10-2007. Earlier editions are listed for reference only.

How to Download JB/T 5000.10-2007

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.