JB/T 12186-2015Static classifiers for mines (English PDF)
矿用静态选粉机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12186-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12186-2015 is the English-translated version of 矿用静态选粉机.
JB/T 12186-2015 is the Chinese machinery industry standard for static classifiers used in mines. It gives their types and basic parameters, the technical requirements, the test methods and the inspection rules, then the marking, packaging, transport and storage.
The equipment it applies to is the static classifier working in the ore fines separation system of a roll press or a roll mill, called the separator in the text.
Its Chinese classification is D96. Among the standards it quotes are GB/T 1804-2000, GB/T 11345-2013, GB/T 25706, JB/T 5000.3-2007, JB/T 5000.10 and JB/T 5000.13.
Found what you need?
Document preview — JB/T 12186-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12186-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for static classifiers used in mines. It gives their types and basic parameters, the technical requirements, the test methods and the inspection rules, then the marking, packaging, transport and storage. The equipment it applies to is the static classifier working in the ore fines separation system of a roll press or a roll mill, called the separator in the text. Its Chinese classification is D96. Among the standards it quotes are GB/T 1804-2000, GB/T 11345-2013, GB/T 25706, JB/T 5000.3-2007, JB/T 5000.10 and JB/T 5000.13.
JB/T 12186-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 11345-2013 — Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
GB/T 13306
GB/T 25706
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000.10
JB/T 5000.12
JB/T 5000.13
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
GB/T 10605-2015 — Center driving rotary-rake thickener
JB/T 12192-2015 — Deep cone thickeners
JB/T 12183-2015 — Magnetic separators for mineral recovery
JB/T 12177-2015 — Permanent magnet drum-roll high intensity magnetic separators
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 11345-2013Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment
- GB/T 13306Plates
- GB/T 25706Code of designations for mining machinery products
- JB/T 5000.3-2007General technical requirements for heavy machinery - Part 3: Weldments
How to Download JB/T 12186-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12186-2015
$105.00