Valid

JB/T 12941-2016Continuous hot-dip galvanizing lines for steel strip - Acceptance specification (English PDF)

带钢连续热镀锌机组验收规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (31 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12941-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 22, 2016

Implementation date

April 1, 2017

Scope

JB/T 12941-2016 is the English-translated version of 带钢连续热镀锌机组验收规范.

JB/T 12941-2016 is the recommended Chinese machinery industry standard that fixes how a continuous hot-dip galvanizing line for steel strip is accepted. Its provisions run to the individual items of equipment on the line, their installation accuracy, the control accuracy of the line and the guaranteed values of the plant.

The lines it applies to galvanize strip from 0.15 mm to 4.0 mm thick and from 700 mm to 1 600 mm wide at a speed of not more than 180 m/min, and galvanizing lines of similar specification may be accepted by reference to it.

Among the standards it quotes are GB/T 708, GB/T 709, GB 2894, GB 12348, GB 28665, GB 50205 and GB 50486. The classification codes are H94 and ICS 77.180.

Found what you need?

Document preview — JB/T 12941-2016

National Standard of the People's Republic of China

ICS: 77.180

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references

1 Foreword

JB/T 12941-2016 was issued by MIIT on 22 October 2016 and has been in force since 1 April 2017.

2 Scope

This standard is the recommended Chinese machinery industry standard that fixes how a continuous hot-dip galvanizing line for steel strip is accepted. Its provisions run to the individual items of equipment on the line, their installation accuracy, the control accuracy of the line and the guaranteed values of the plant. The lines it applies to galvanize strip from 0.15 mm to 4.0 mm thick and from 700 mm to 1 600 mm wide at a speed of not more than 180 m/min, and galvanizing lines of similar specification may be accepted by reference to it. Among the standards it quotes are GB/T 708, GB/T 709, GB 2894, GB 12348, GB 28665, GB 50205 and GB 50486. The classification codes are H94 and ICS 77.180.

3 Normative references

JB/T 12941-2016 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 191

GB/T 708

GB/T 709

GB/T 2518

GB 2894

GB/T 3222.1

GB/T 3222.2

GB/T 4879

GB 5959.3

GB/T 7932

GB/T 10067.3

GB 12348

GB/T 14050

GB 16297-1996 — Integrated emission standard of air pollutants

GB/T 16618

GB 28665

GB 50205

GB 50231

GB 50235

GB 50303

GB 50486

GB 50093

JB/T 5000.10

4 About this standard

Issued by: MIIT

English translation: about 31 pages

5 Classification and status

International classification (ICS): 77.180

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 14050

Similar standards

JB/T 13982-2021|JB/T 12944-2016|GB/T 41746-2022|GB/T 41747-2022|GB/T 44553-2024|JB/T 12940-2016

How to Download JB/T 12941-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.