JB/T 11595-2013Steel tube sizing and reducing mills (English PDF)
钢管定减径机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11595-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11595-2013 is the English-translated version of 钢管定减径机.
JB/T 11595-2013 is a recommended Chinese machinery industry standard for steel tube sizing and reducing mills. It gives the terms and definitions used for the machine, the product classification, the technical requirements, the test methods, the inspection rules, and the marking, packaging, transport and storage provisions.
It applies to machines of this kind used as metallurgical equipment. The standard falls under H94 in the Chinese classification and 77.180 in the international one, with the Ministry of Industry and Information Technology as the issuing body.
Among the standards it quotes are GB/T 1503, GB/T 1504, GB/T 4879, GB 5226.1, GB/T 10095.1-2008, GB/T 13313 and GB/T 15547.
Found what you need?
Document preview — JB/T 11595-2013
National Standard of the People's Republic of China
- ICS
- 77.180
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11595-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for steel tube sizing and reducing mills. It gives the terms and definitions used for the machine, the product classification, the technical requirements, the test methods, the inspection rules, and the marking, packaging, transport and storage provisions. It applies to machines of this kind used as metallurgical equipment. The standard falls under H94 in the Chinese classification and 77.180 in the international one, with the Ministry of Industry and Information Technology as the issuing body. Among the standards it quotes are GB/T 1503, GB/T 1504, GB/T 4879, GB 5226.1, GB/T 10095.1-2008, GB/T 13313 and GB/T 15547.
JB/T 11595-2013 falls under ICS 77.180, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1503
GB/T 1504
GB/T 4879
GB 5226.1
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 13306
GB/T 13313
GB/T 15547
JB/T 5000.1
JB/T 5000.2
JB/T 5000.3
JB/T 5000.4
JB/T 5000.5
JB/T 5000.6
JB/T 5000.7
JB/T 5000.8
JB/T 5000.9
JB/T 5000.10
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 13314-2025 — Forged steel work rolls for cold rolling - General technical specifications
GB/T 1504-2024 — Cast iron rolls
YB/T 4064-2015 — Technical specifications of pay-off reel mandrel and tension reel mandrel for metal strip
JB/T 15077-2025 — Fully automatic horizontal high-speed wire coil baling machine
JB/T 14963-2025 — Evaluation requirements for green factory in the hot-rolled steel tube industry
JB/T 11593-2013 — Six-high Strip Cold Rolling Mill
6 Classification and status
International classification (ICS): 77.180
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1503Cast steel rolls
- GB/T 1504Cast iron rolls
- GB/T 4879Rustproof packaging
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 10095.1-2008Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- GB/T 10095.2-2008Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
Similar standards
How to Download JB/T 11595-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 11595-2013
$135.00