JB/T 12190-2015MZL type gear reducers for vertical mills (English PDF)
MZL型立磨减速器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12190-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12190-2015 is the English-translated version of MZL型立磨减速器.
JB/T 12190-2015 is the Chinese machinery industry standard for MZL type gear reducers built for vertical mills. It sets out the types and basic parameters of the reducer, the technical requirements, the test methods and the inspection rules, and the marking, packaging, transport and storage.
The reducers it covers are the main drives of the vertical roller mills used for slag grinding and for raw meal and cement grinding lines, and the same main reduction gear unit suits other similar grinding systems.
Among the standards it quotes are GB/T 1174-1992, GB/T 3480.5-2008, GB/T 10095.1-2008, GB/Z 18620.4-2008, JB/T 6395-2010 and JB/T 6396-2006.
Found what you need?
Document preview — JB/T 12190-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12190-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for MZL type gear reducers built for vertical mills. It sets out the types and basic parameters of the reducer, the technical requirements, the test methods and the inspection rules, and the marking, packaging, transport and storage. The reducers it covers are the main drives of the vertical roller mills used for slag grinding and for raw meal and cement grinding lines, and the same main reduction gear unit suits other similar grinding systems. Among the standards it quotes are GB/T 1174-1992, GB/T 3480.5-2008, GB/T 10095.1-2008, GB/Z 18620.4-2008, JB/T 6395-2010 and JB/T 6396-2006.
JB/T 12190-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 700-2006 — Carbon structural steels
GB/T 1174-1992 — Cast bearing metals
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1356
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3480.5-2008 — Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
GB 5903-2011 — Gear oils for industrial enclosed gear system
GB/T 6388
GB/T 6404.1
GB/T 6404.2
GB/T 6414-1999 — Castings. System of dimensional tolerances and machining allowances
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 11365-1989 — Accuracy of bevel and hypoid gears
GB/T 13306
GB/T 13384
GB/Z 18620.4-2008 — Cylindrical gears - Code of inspection practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking
GB/T 20082
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000.6
JB/T 5000.8-2007 — General technical requirements for heavy machinery - Part 8: Forgings
JB/T 5000.10
JB/T 5000.12
JB/T 5000.14-2007 — General technical requirements for heavy machinery - Part 14: Non-destructive testing of steel castings
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
JB/T 6395-2010 — Technical requirements for large gear and gear ring forgings
JB/T 6396-2006 — Large alloy structural steel forgings - Technical requirements
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 12191-2019 — Vertical shaft impact crushers
JB/T 12187-2015 — Crawler mobile crushing and screening plants
JB/T 12182-2015 — High-pressure double-roll lignite briquetting machines
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 700-2006Carbon structural steels
- GB/T 1174-1992Cast bearing alloy
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1356Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
Similar standards
How to Download JB/T 12190-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5903-2011 — Gear oils for industrial enclosed gear system
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
JB/T 12190-2015
$199.00