JB/T 13524-2018Screw-down gear reducers for roughing mills of hot strip mills (English PDF)
热连轧机组粗轧机压下减速机
This is a limited preview
Buy now to download the full PDF (26 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13524-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 4, 2018
Implementation date
May 1, 2019
Scope
JB/T 13524-2018 is the English-translated version of 热连轧机组粗轧机压下减速机.
JB/T 13524-2018 is a recommended Chinese machinery industry standard for the gear reducer unit serving the screw-down system of the roughing mill on a hot strip mill.
It sets the type, the basic parameters and dimensions, the technical requirements, the test methods and the inspection rules for this reducer, and then its marking, packaging, transportation and storage.
It applies to the reducer of the rough rolling mill in a hot rolling line. The standard carries the Chinese classification H94 and the international classification 77.180.
It quotes GB/T 191, GB/T 228.1, GB/T 699, GB/T 1095, GB/T 1096, GB/T 1176, GB/T 1800.2-2009, GB/T 1958, GB/T 3077 and GB/T 4879.
Found what you need?
Document preview — JB/T 13524-2018
National Standard of the People's Republic of China
- ICS
- 77.180
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 13524-2018 was issued by MIIT on 4 July 2018 and has been in force since 1 May 2019.
2 Scope
This standard is a recommended Chinese machinery industry standard for the gear reducer unit serving the screw-down system of the roughing mill on a hot strip mill. It sets the type, the basic parameters and dimensions, the technical requirements, the test methods and the inspection rules for this reducer, and then its marking, packaging, transportation and storage. It applies to the reducer of the rough rolling mill in a hot rolling line. The standard carries the Chinese classification H94 and the international classification 77.180. It quotes GB/T 191, GB/T 228.1, GB/T 699, GB/T 1095, GB/T 1096, GB/T 1176, GB/T 1800.2-2009, GB/T 1958, GB/T 3077 and GB/T 4879.
3 Normative references
JB/T 13524-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 228.1
GB/T 699
GB/T 1095
GB/T 1096
GB/T 1176
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-2009
GB/T 1958
GB/T 3077
GB/T 4879
GB/T 5121.29-2015 — Methods for chemical analysis of copper and copper alloys - Part 29: Determination of aluminium oxide content
GB/T 5121.10-2008 — Methods for chemical analysis of copper and copper alloys -- Part 10: Determination of tin content
GB/T 5121.11-2008 — Methods for chemical analysis of copper and copper alloys -- Part 11: Determination of zinc content
GB/T 5121.1-2008 — Methods for chemical analysis of copper and copper alloys -- Part 1: Determination of copper content
GB/T 5121.12-2008 — Methods for chemical analysis of copper and copper alloys -- Part 12: Determination of antimony content
GB/T 5121.13-2008 — Methods for chemical analysis of copper and copper alloys -- Part 13: Determination of aluminium content
GB/T 5121
4 About this standard
Issued by: MIIT
English translation: about 26 pages
5 Classification and status
International classification (ICS): 77.180
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 699Quality carbon structure steels
- GB/T 1095Square and Rectangular keyways
- GB/T 1096Square and rectangular keys
- GB/T 1176Casting copper and copper alloys
GB/T 5121
Similar standards
How to Download JB/T 13524-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1095-2003 — Square and Rectangular keyways
GB/T 1096-2003 — Square and rectangular keys
GB/T 1176-2013 — Casting copper and copper alloys
Secure payment via Stripe
Payments accepted
JB/T 13524-2018
$465.00