Valid

JB/T 6395-2010Technical requirements for large gear and gear ring forgings (English PDF)

大型齿轮、齿圈锻件 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6395-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 6395-2010 is the English-translated version of 大型齿轮、齿圈锻件 技术条件.

JB/T 6395-2010 is the Chinese standard "Technical requirements for large gear and gear ring forgings". Its scope clause reads: This standard specifies the technical requirements, inspection rules, test methods, quality certificate and marking of large gear (including gear shaft) and girth gear forgings.

This standard is applicable to order, manufacture and acceptance of large gear (including gear shaft) and girth gear forgings. Its clauses include order requirements.

Found what you need?

Document preview — JB/T 6395-2010

National Standard of the People's Republic of China

Replacing
JB/T 6395-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative References
  • 3 Order Requirements
  • 4 Manufacturing Process
  • 4.1 Smelting
  • 4.2 Forging
  • 4.3 Heat Treatment
  • 4.4 Mechanical Processing
  • 4.5 Repair Welding
  • 5 Technical Requirements
  • 5.1 Chemical Composition
  • 5.2 Mechanical Property
  • 5.3 Hardness
  • 5.4 Grain Size
  • 5.5 Non-destructive Testing
  • 6 Inspection Rules and Test Methods
  • 6.1 Chemical Composition Analysis
  • 6.2 Mechanical Property Test
  • 6.3 Grain Size Inspection
  • 6.4 Non-destructive Testing
  • 6.5 Retest
  • 6.6 Re-heat Treatment
  • 7 Acceptance and Quality Certificate
  • 7.1 Acceptance
  • 7.2 Quality Certificate
  • 8 Marking and Packaging
  • Table 1 Chemical Composition (Mass Fraction)
  • Table 2 Permissible Deviation of Chemical Composition (Mass Fraction) in Product Analysis
  • Table 3 Mechanical Property
  • Table 4 Inspection Items and Sampling Requirements
  • Table 5 Amount of Reduction in Tangential and Horizontal Mechanical Property Indexes

1 Scope

This standard specifies the technical requirements, inspection rules, test methods, quality certificate and marking of large gear (including gear shaft) and girth gear forgings.

This standard is applicable to order, manufacture and acceptance of large gear (including gear shaft) and girth gear forgings.

2 Normative References

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.

GB/T 223 Methods for Chemical Analysis of Iron, Steel and Alloy (All Parts)

GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature (GB/T 228-2002, Eqv ISO 6892: 1998 (E))

GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method (GB/T 229-2007, ISO 148-1: 2006, MOD)

GB/T 230.1 Metallic Materials - Rockwell Hardness Test - Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N and T) (GB/T 230.1-2009, ISO 6508-1: 2005, MOD)

GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method (GB/T 231.1-2009, ISO 6506-1: 2005, MOD)

GB/T 6394 Metal - Methods for Estimating the Average Grain Size (GB/T 6394-2002, ASTM E 112: 1996, MOD)

JB/T 5000.15-2007 Heavy Mechanical General Techniques and Standards - Part 15: Non-destructive Inspection of Forged Steel

JB/T 6397-2006 Specification for the Heavy Carbon Structural Steel Forgings

3 Order Requirements

3.1

The Demander shall indicate the name, material designation, supply quantity and delivery state of forgings, the corresponding technical requirements and inspection items agreed by the Supplier and the Demander as well as the inspection items beyond this standard in order contract.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 6395

EditionTitleRevisionStatus
JB/T 6395-2010Technical requirements for large gear and gear ring forgingscurrent editionCurrent
JB/T 6395-1992Technical requirements for large gear and gear ring forgingsprevious editionSuperseded

This page sells the current edition, JB/T 6395-2010. Earlier editions are listed for reference only.

How to Download JB/T 6395-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6395-2010

$105.00