Valid

JB/T 13399.2-2018Wide and heavy plate roughing mills - Part 2: General technical specifications (English PDF)

宽厚板粗轧机 第2部分:通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13399.2-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2018

Implementation date

December 1, 2018

Scope

JB/T 13399.2-2018 is the English-translated version of 宽厚板粗轧机 第2部分:通用技术条件.

JB/T 13399.2-2018 is part 2 of a recommended Chinese machinery industry standard on wide and heavy plate roughing mills, and it carries the general technical specifications for them.

A roughing mill is the first rolling stand a slab meets on a plate line, and this part states the technical requirements for such machines together with the test methods, the acceptance rules and the provisions for marking, packaging, transport and storage.

It is classified H94 and 77.180. Much of its supporting detail is handed to the JB/T 5000 series of general specifications for heavy machinery, which it quotes extensively, along with GB/T 1504 and GB/T 1800.2-2009. Issued on 30 April 2018, it has applied since 1 December 2018.

Found what you need?

Document preview — JB/T 13399.2-2018

National Standard of the People's Republic of China

ICS
77.180

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 13399.2-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2018 and has been in force since 1 December 2018.

It is one of 2 parts of the JB/T 13399 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is part 2 of a recommended Chinese machinery industry standard on wide and heavy plate roughing mills, and it carries the general technical specifications for them. A roughing mill is the first rolling stand a slab meets on a plate line, and this part states the technical requirements for such machines together with the test methods, the acceptance rules and the provisions for marking, packaging, transport and storage. It is classified H94 and 77.180. Much of its supporting detail is handed to the JB/T 5000 series of general specifications for heavy machinery, which it quotes extensively, along with GB/T 1504 and GB/T 1800.2-2009.

JB/T 13399.2-2018 falls under ICS 77.180, in the field of metallurgy.

This catalogue holds 222 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1504

GB/T 1800.2-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

JB/T 4120

JB/T 5000.1

JB/T 5000.3

JB/T 5000.6

JB/T 5000.8

JB/T 5000.9

JB/T 5000.10

JB/T 5000.11

JB/T 5000.12

JB/T 5000.13

JB/T 5000.14-2007 — General technical requirements for heavy machinery - Part 14: Non-destructive testing of steel castings

JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings

4 Where this standard sits

It cites 14 standards, among them GB/T 1800.2-2009, JB/T 5000.14-2007, JB/T 5000.15-2007, listed in full above.

It is one part of the JB/T 13399 series, of which this catalogue holds 2 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 13399.1-2018 — Heavy plate roughing mills - Part 1: Performance parameters

7 Classification and status

International classification (ICS): 77.180

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 13399.2-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13399.2-2018

$329.00