HG/T 4596-2014Turbo dryers (English PDF)
涡轮干燥机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4596-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4596-2014 is the English-translated version of 涡轮干燥机.
HG/T 4596-2014 is the Chinese chemical industry standard for turbo dryers, a class of process drying equipment. It defines the types and the basic parameters of the machine and then the technical requirements, the test methods, the inspection rules and the rules for marking, packaging, storage and transport.
It applies to turbo dryers used for drying powdered, granular and flake materials of all kinds.
Design and verification lean on general engineering standards, among them GB/T 985.1, GB/T 1184, GB/T 1804, GB/T 3768, GB/T 3797, GB 3836.1, GB/T 9239.1, GB/T 9239.2, GB/T 9969, GB/T 13306 and GB/T 13384, together with JB/T 4711, JB/T 5000.10 and JB/T 8571. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4596-2014
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4596-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for turbo dryers, a class of process drying equipment. It defines the types and the basic parameters of the machine and then the technical requirements, the test methods, the inspection rules and the rules for marking, packaging, storage and transport. It applies to turbo dryers used for drying powdered, granular and flake materials of all kinds. Design and verification lean on general engineering standards, among them GB/T 985.1, GB/T 1184, GB/T 1804, GB/T 3768, GB/T 3797, GB 3836.1, GB/T 9239.1, GB/T 9239.2, GB/T 9969, GB/T 13306 and GB/T 13384, together with JB/T 4711, JB/T 5000.10 and JB/T 8571.
HG/T 4596-2014 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 908
GB/T 985.1
GB/T 1184
GB/T 1804
GB/T 3768
GB/T 3797
GB 3836.1
GB/T 4879
GB/T 9239.1
GB/T 9239.2
GB/T 9969
GB/T 13306
GB/T 17107
GB/T 13384
JB/T 4711
JB/T 5000.10
JB/T 8571
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 4595-2014 — Fine grinding equipment for thermosetting powder coatings
HG/T 4594-2014 — Cooling and flaking equipment for thermosetting powder coatings
HG/T 4591-2014 — Chemical hydraulic turbines
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 908Forged bars for dimensions,shape,weight and tolerances
- GB/T 985.1Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 3797Electrical control assemblies
How to Download HG/T 4596-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3836.1-1983 — Electrical apparatus for explosive atmosphere--General requirements
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB 3836.1-2010 — [Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
HG/T 4596-2014
$105.00