JB/T 4711-2003Coating and transport packaging of pressure vessels (English PDF)
压力容器涂敷与运输包装
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4711-2003 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 17, 2003
Implementation date
July 1, 2003
Scope
JB/T 4711-2003 is the English-translated version of 压力容器涂敷与运输包装.
JB/T 4711-2003 is the Chinese standard "Coating and transport packaging of pressure vessels". Its scope clause reads: This Standard specifies relevant requirements of coating and packing for transport of pressure vessels and their components and parts.
In addition to those specified in this Standard, coating and packing for transport of pressure vessels and their components and parts shall also meet the technical requirements of drawings.
Its clauses include coating; packing for transport; pictorial marks; about modification on standard’s name; about applicable scope of standard; about packing requirements for flange interface; about packing of vessels exited factory in pieces; about packing for transport of documentary data; content; formulation and revision.
Found what you need?
Document preview — JB/T 4711-2003
National Standard of the People's Republic of China
- Replacing
- JB 2536-1980
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Republic of China3
- Foreword5
- 1 Scope6
- 2 Normative references6
- 3 Coating6
- 4 Packing for transport8
- 5 Pictorial marks14
- vessels transport”16
- Supplementary statement on matters related to the standard of reference20
1 Scope
This Standard specifies relevant requirements of coating and packing for transport of pressure vessels and their components and parts.
In addition to those specified in this Standard, coating and packing for transport of pressure vessels and their components and parts shall also meet the technical requirements of drawings.
2 Normative references
The following normative documents contain provision which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 146.1-1983, Rolling Stock Gauge for Standard Gauge Railways
GB 146.2-1983, Structure Gauge for Standard Gauge Railway
GB 191-2000, Packaging-Pictorial Marking for Handling of Goods
GB/T 197-1981, General Purpose Screw Threads -- Tolerances and Fits for
Diameter from 1 to 355mm
GB/T 8923-1988, Rust Grades and Preparation Grades of Steel Surfaces
Before Application of Paints and Related Products
3 Coating
3.1 Surface de-rusting
3.1.1
Clear off rusts on external surfaces of vessels that are made of carbon steel and low alloy steel, rusts on internal surfaces on which de-rusting operation can be conducted and other coated surfaces that require coating with anticorrosive paint.
3.2.5
Unless otherwise specified in drawing, anticorrosive paint may not be
coated under the following conditions:
a) internal surface of vessel;
b) internal components exited factory along with assembled vessel;
c) stainless steel pressure vessels;
d) pressure vessels made of non-ferrous metals and their alloys.
3.2.6
As for following grooves, anticorrosive paint shall not be coated within the range of approximate 100mm to groove edge. If coating is required, protective film that is harmless to welding quality and is easy to remove may be coated:
a) cut surface grooves of vessels exited factory in segments;
b) peripheral grooves of grooves in pieces;
c) other welding grooves on vessel shell that need to be assembled and welded at application site.
3.3 Coating of protective film
Polished surfaces, e.g. screw threads and sealing surfaces, shall be coated with protective film that is easy to remove.
4 Packing for transport
4.1 General packing requirements for transport
4.1.1
Select adaptable packing structure and method according to characteristics such as application requirements, structure dimensions, weight, distance and means of transport (railway, highway, waterway and air) of vessel.
The packing of vessel shall have sufficient intensity to ensure that vessel and its components and parts are able to be transported to destination safely and reliably.
4.2 Packing type of vessels
4.2.1 Nude packing
Large or extra-large parts that have enough rigid and are undetachable shall be supported by bracket at the bottom and be tensioned by tensioning hoop at the top to prevent rolling and motion.
4.2.2 Frame
Vessel as well as its components and parts are reliably fixed in firm frame that is made of section steel or square timber.
4.2.3 Wrapping
Use soft materials to pack components and parts that are not easy to be damaged or lost during transport and loading/unloading process, that have relatively big specification and small quantity. Then use iron wire or flat steel to tie up.
4.2.4 Dark case
Dark case refers to enclosed packing case that is used to pack high-precision small parts that are easy to be damaged or lost and shall be protected from moisture and corrosion.
4.2.5 Skeleton case
Use this packing type for components and parts that do not need dark case and shall not be wrapped. The case may be lined with asphalt felt inside if necessary.
4.3
Packing for transport of vessels exited factory in a whole or in segments
4.3.1 General requirements
Generally, use nude packing for vessels exited factory in whole or in segments.
4.3.2 Packing for transport of vessels exited factory in a whole
4.3.2.1
Prior to shipping, remove all residues in vessel.
4.3.2.2
Manufacturer shall conduct package design according to specific […]
4.3.3 Packing for transport of vessels exited factory in segments
4.3.3.1
For vessels that exit factory in segments, if rigidity of opening end is
insufficient, it shall set reinforcing stay and seal the opening in appropriate mode.
4.3.3.2
Other requirements are same with 4.3.2.2~4.3.2.5 of this Standard.
4.4 Packing for transport of vessels exited factory in pieces
4.4.1
Before packing, number and mark the pieces according to sequence of cutting plan.
4.4.2
Overlap each group of pieces on steel or wood convex brackets, concave face facing downward. Use wood block (or other buffer materials) to cushion the pieces between them. Use flat steel and bracket to tied up and weld. For cylindrical vessels, divide into pieces. The pieces shall be overlapped upright and be bundled.
4.4.3
Gross weight of each group of pieces and brackets shall not exceed 15t.
If necessary, set lifting lug for bracket to lift it. It is forbidden to directly lift the pieces up.
4.5
Packing for transport of vessels that have special requirements
4.5.1
For pressure vessels that are made of stainless steel, non-ferrous metal and its alloy, special packing requirements for transport are as follows:
a) Before loading for transport, thoroughly clean up residues, oil stain and water stain in vessels;
b) when lifting, use nylon sling or steel wire rope that has protective case. It is strictly forbidden to directly tie steel wire rope onto vessel for lifting.
During packing process for transport, other measures shall be taken so as to prevent potential pollution of harmful ions such as iron and copper.
c) during packing process for transport, measures shall be taken to protect anticorrosive surfaces against various damages. If passive (oxidation) film of anticorrosive surface is damaged during packing process for transport, measures shall be taken to restore it so as to meet original technical requirements.
4.5.2
Special packing requirements for transport of vessels that need to be filled with inert gas for shielding are as follows:
a) type, concentration and pressure of inert gas that is filled in vessel shall be in accordance with technical requirements of drawing;
4.6.5
When casing, heavy components and parts shall be placed at lower part
of case so as to lower package gravity center. Where it is incapable to realize it, appropriate measures shall be taken to ensure gravity center not exceeding
1/2 of case height.
4.6.6
Weight per packing case shall not exceed 3t.
4.7 Packing for transport of documentary data
4.7.1
Documentary data includes product’s exit-factory quality certificate, packing list and relevant documents specified in 4.7.1.2 of this Standard.
4.7.1.1
Each batch of goods shipped must be accompanied with a packing list to indicate the goods at each location number in every case, in every bag and in every stand, to indicate that if the goods are integral or they are only parts.
4.7.1.2
According to delivery conditions and packing conditions for transport of vessels, the following documentary data shall also be included if necessary:
a) installation drawing and installation instructions;
b) stowage plan required in 4.1.7, field reassembling and welding procedure documents, and documents required for inspection;
c) arrangement drawing of vessel exited factory in pieces.
4.7.2
All documentary data shall be sorted and bound in book form and shall be packed and sealed in plastic bags so as to prevent water, moisture and missing.
4.7.3
Where the above-mentioned documentary data are dispatched together with goods, they shall be packed in the biggest dark case. The dark case shall be clearly marked on external face. The quality evidentiary documents may also be posted separately.
5 Pictorial marks
5.1
Make the following marks on surface of nude-packed vessel and obvious parts of packing case:
a) Delivery mark:
1) factory number (or command letter No.);
1 About modification on standard’s name
The name of JB 2536 is “Paint, Packing and Transportation of Pressure
Vessels”. In this Standard, it modified the “paint” to “coating”, “packing and transportation” to “packing for transport”. The reasons are as follows:
1) JB 2536 was formulated in late 1970s. At that time, the surface of pressure vessels only required to spray antirust paint. It also only specified simple principle requirements for drying, oil stain removing, rust removing, welding spatter removing to metal surface in front of paint. In JB 2536, it also made a table to recommend major paint types for user.
More than 20 years have passed, and technology and people’s requirements for product quality (including surface quality) have been greatly improved. Various new metal and non-metallic anticorrosive coatings continue to appear. Surface modification technology has been widely used in many production fields. Therefore, simple painting cannot meet requirements for many pressure vessels. For this reason, we modified “paint” in standard’s name to “coating”. “Coating” is selected so as to be in line with the internationally-accepted name. It includes quality level requirements for surface de-rusting and quality requirements for coating of anticorrosive coating.
2) This Standard does not specify product’s transport. It only specifies packing requirements when product is transported. Therefore, it is more suitable to modify the name to “packing for transport”.
2 About applicable scope of standard
JB 2536 is only applicable to “painting, packing and transport of various welding pressure vessels that are made of carbon steel, low alloy steel and stainless acid resistant steel used for petroleum, chemical industries”.
5 About packing requirements for flange interface
Flange interface, to-be-welded groove, thread interface are parts that shall be specially protected during transport. Therefore, in 4.1.4~4.1.6 of this Standard respectively propose strict requirements for their packings in case that they are damaged during transport as well as -loading-unloading process.
6 About packing of vessels exited factory in pieces
JB 2536-1980 required to overlap pieces on bracket, concave face facing upward. With the accumulation of technical experience, this method has long been abandoned. In 4.4.2 of this Standard, it specifies that “Overlap each group of pieces on steel or wood convex brackets, concave face facing downward”.
In order to prevent deformation of pieces during transport, the pieces with the same or similar curvature shall be combined into one group. Grouping shall not be too few. The convex portion of bracket is as close as possible to curvature of flap.
7 About packing for transport of vessels that have special requirements
“Vessels that have special requirements” mentioned here include vessels that are made of stainless steel, non-ferrous metal and its alloy; vessels of particular structure such as multiple layers or hot housing or flat steel strips. In 4.5 of this
Standard, it specifies special requirements for packing for transport of above vessels.
8 About packing for transport of documentary data
1 Content
Standard content generally includes mandatory requirements, special disabling regulations, and recommended guidelines. Recommended guidelines are not mandatory. It shall be noted that standards are not necessary and are not possible to regulate all aspects of their scope. Therefore, aspects that are not regulated shall not be banned. Standards are different from manuals.
Standards cannot replace the role of training, experience and technical identification. But experience and technical identification cannot be used to deny mandatory requirements and special prohibitions.
2 Formulation and revision
Suggestions on the formulation and revision of national and industrial standards for boiler and pressure vessels shall be directly submitted to Secretariat of
National Technical Committee on Boilers and Pressure Vessels of
Standardization Administration of China. It shall be decided by the Committee whether to report to the relevant government authorities. In addition to the procedures prescribed by the relevant government authorities that shall be obeyed, the committee adopts a proposal review system for the formulation and revision of the standard of reference. The standard case is a form of rapid response of the Committee to technological progress.
3 Interpretation
Only National Technical Committee on Boilers and Pressure Vessels of
Standardization Administration of China has the right to formally interpret the standard of reference. Application for standard interpretation shall be submitted to the Secretariat in writing. The inquirer is obliged to provide as detailed and comprehensive information as possible. Enquiries that are not directly related to standard terms or that cannot be understood are considered to be part of technical advice. The Committee has the right to refuse to answer or agree to provide paid services.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 41303-2022Technical requirements for receiver of solar power tower plant
- FZ/T 95031-2021Airflow dyeing machine
- FZ/T 95035-2021Air-Liquid dyeing machine
- GB/T 21432-2021Graphite pressure vessels
- FZ/T 95027-2019High temperature and pressure jet-overflow dyeing machine
- GB/T 9652.1-2019Specification of hydraulic turbine governing systems
Similar standards
Editions of JB/T 4711
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4711-2003 | Coating and transport packaging of pressure vessels | current edition | Current |
| JB 2536-1980 | Coating and transport packaging of pressure vessels | previous edition | Superseded |
This page sells the current edition, JB/T 4711-2003. Earlier editions are listed for reference only.
How to Download JB/T 4711-2003
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 4711-2003
$75.00