Valid

HG/T 4177-2011Automatic complete units for lime milk preparation (English PDF)

石灰乳液自动配制成套装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4177-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4177-2011 is the English-translated version of 石灰乳液自动配制成套装置.

HG/T 4177-2011 is a recommended Chinese chemical industry standard for automatic complete units that prepare lime milk. It gives the definitions for this equipment and sets out its requirements, the inspection methods and the inspection rules, together with the provisions for marking, packaging, transport and storage.

The units covered prepare the emulsion automatically from slaked lime powder, installed where the operating ambient temperature runs from 0 °C to 50 °C and the working pressure is atmospheric.

It cites GB/T 191, GBZ 1, GBZ 2.1, GB/T 3797, GB/T 13306, GB/T 13384, GB 18540, DLGJ 158, HG/T 3796.1, HG/T 3796.2, HG/T 3796.3, HG/T 20507, HG/T 20509 and JB/T 4711. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4177-2011

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4177-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese chemical industry standard for automatic complete units that prepare lime milk. It gives the definitions for this equipment and sets out its requirements, the inspection methods and the inspection rules, together with the provisions for marking, packaging, transport and storage. The units covered prepare the emulsion automatically from slaked lime powder, installed where the operating ambient temperature runs from 0 °C to 50 °C and the working pressure is atmospheric. It cites GB/T 191, GBZ 1, GBZ 2.1, GB/T 3797, GB/T 13306, GB/T 13384, GB 18540, DLGJ 158, HG/T 3796.1, HG/T 3796.2, HG/T 3796.3, HG/T 20507, HG/T 20509 and JB/T 4711.

HG/T 4177-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 191

GBZ 1

GBZ 2.1

GB/T 3797

GB/T 13306

GB/T 13384

GB 18540

DLGJ 158

HG/T 3796.1

HG/T 3796.2

HG/T 3796.3

HG/T 20507

HG/T 20509

JB/T 4711

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy

HG/T 4178-2011 — Intelligent dual-cup flash point testers

HG/T 4176-2011 — Pneumatic triple-offset butterfly valves - General technical specifications

HG/T 4175-2011 — General technical requirements for instrument power supply systems in chemical plants

6 Classification and status

Chinese Standard Classification (CCS): G 97

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4177-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4177-2011

$55.00