JB/T 11244-2012High gravity device (English PDF)
超重力装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11244-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11244-2012 is the English-translated version of 超重力装置.
JB/T 11244-2012 is a recommended Chinese machinery industry standard for the high gravity device. It sets out the models of the device and its parameters, the requirements it has to meet, the test methods and the inspection rules.
Marks and signs, the instructions supplied with the equipment, packaging, transport and storage are covered as well, and high gravity devices are what it applies to.
Among the standards it quotes are GB 150, GB/T 191, GB/T 4201, GB/T 4334, GB/T 5267.4, GB/T 6388, GB/T 9969, GB/T 10894, GB/T 10895, GB/T 13306, GB 19815, JB/T 4385, JB/T 4711, JB/T 7217 and JB/T 9095. Its classifications are J88 and 13.030.40.
Found what you need?
Document preview — JB/T 11244-2012
National Standard of the People's Republic of China
- ICS
- 13.030.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11244-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the high gravity device. It sets out the models of the device and its parameters, the requirements it has to meet, the test methods and the inspection rules. Marks and signs, the instructions supplied with the equipment, packaging, transport and storage are covered as well, and high gravity devices are what it applies to. Among the standards it quotes are GB 150, GB/T 191, GB/T 4201, GB/T 4334, GB/T 5267.4, GB/T 6388, GB/T 9969, GB/T 10894, GB/T 10895, GB/T 13306, GB 19815, JB/T 4385, JB/T 4711, JB/T 7217 and JB/T 9095. Its classifications are J88 and 13.030.40.
JB/T 11244-2012 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150
GB/T 191
GB/T 4201
GB/T 4334
GB/T 5267.4
GB/T 6388
GB/T 9969
GB/T 10894
GB/T 10895
GB/T 13306
GB 19815
JB/T 4385
JB/T 4711
JB/T 7217
JB/T 9095
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11247-2012 — Chain turner
JB/T 11246-2012 — Tunnel drum turner
JB/T 11245-2012 — Turning and aeration fermentation bins for sludge composting
6 Classification and status
International classification (ICS): 13.030.40
Chinese Standard Classification (CCS): J 88
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 4201Description, verification and evaluation of balancing machines
- GB/T 4334Corrosion of metals and alloys - Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
- GB/T 5267.4Passivation of corrosion-resistant stainless-steel fasteners
- GB/T 6388Transport package shipping mark
JB/T 4385
Similar standards
How to Download JB/T 11244-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
JB/T 11244-2012
$169.00