JB/T 12071-2014High specific gravity alloy vibrator weights (English PDF)
高比重合金振子
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12071-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12071-2014 is the English-translated version of 高比重合金振子.
JB/T 12071-2014 is the recommended Chinese machinery industry standard for high specific gravity alloy vibrator weights. It fixes the technical requirements for these high-density alloy parts and adds the test methods, inspection rules, packaging, labelling, transport and storage provisions.
The parts it addresses are built on a tungsten base with nickel, copper and further elements added. Environmental and sampling references come from GB/T 2423.4-2008, GB/T 2828.1-2012, GB/T 5586 and QB/T 3832-1999.
The standard carries Chinese classification K14 and international classification 29.120.99. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12071-2014
National Standard of the People's Republic of China
- ICS
- 29.120.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12071-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for high specific gravity alloy vibrator weights. It fixes the technical requirements for these high-density alloy parts and adds the test methods, inspection rules, packaging, labelling, transport and storage provisions. The parts it addresses are built on a tungsten base with nickel, copper and further elements added. Environmental and sampling references come from GB/T 2423.4-2008, GB/T 2828.1-2012, GB/T 5586 and QB/T 3832-1999. The standard carries Chinese classification K14 and international classification 29.120.99.
JB/T 12071-2014 falls under ICS 29.120.99, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 5586
QB/T 3832-1999 — Evaluation of the corrosion test results of the metal deposits for the light industrial products
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators
GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties
GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials
JB/T 12074-2014 — Quantitative Analysis of Composition Metal - Electron Probe Microanalysis
JB/T 12073-2014 — Specification for Silver-tungsten Carbide Electrical Contacts
JB/T 12072-2014 — Automatic cold heading machines for bimetal composite contacts
6 Classification and status
International classification (ICS): 29.120.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 5586Test methods for essential property of electrical contact materials
- QB/T 3832-1999Evaluation of the corrosion test results of the metal deposits for the light industrial products
Similar standards
How to Download JB/T 12071-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 5586-1985 — Test method for essential property of electric contact material
JB/T 12071-2014
$115.00