JB/T 11170-2011Closed recovery pump units for condensate and exhaust steam (English PDF)
凝结水和乏汽闭式回收水泵装置
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11170-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 11170-2011 is the English-translated version of 凝结水和乏汽闭式回收水泵装置.
JB/T 11170-2011 is a recommended Chinese machinery industry standard on closed recovery pump units for condensate and exhaust steam.
It gives the terms and definitions, the classification and basic parameters, the technical requirements, the provisions for the control cabinet and the instruments, the materials and the parts of the unit, the test methods, the inspection rules and the supply requirements.
The units it applies to collect exhaust steam and condensate in steam heating systems, up to a nominal pressure of PN16 and below an upper temperature limit that the text sets.
Among the standards it quotes are GB 150, GB/T 3216, GB/T 5656-2008, GB/T 12224-2005, several parts of GB/T 20801 and JB/T 4711. Its classification codes are J71 and 23.080.
Found what you need?
Document preview — JB/T 11170-2011
National Standard of the People's Republic of China
- ICS
- 23.080
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11170-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 20 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on closed recovery pump units for condensate and exhaust steam. It gives the terms and definitions, the classification and basic parameters, the technical requirements, the provisions for the control cabinet and the instruments, the materials and the parts of the unit, the test methods, the inspection rules and the supply requirements. The units it applies to collect exhaust steam and condensate in steam heating systems, up to a nominal pressure of PN16 and below an upper temperature limit that the text sets. Among the standards it quotes are GB 150, GB/T 3216, GB/T 5656-2008, GB/T 12224-2005, several parts of GB/T 20801 and JB/T 4711. Its classification codes are J71 and 23.080.
JB/T 11170-2011 falls under ICS 23.080, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150
GB/T 1047
GB/T 1048
GB/T 3216
GB/T 3323
GB 4272
GB/T 5656-2008 — Technical specification for centrifugal pumps -- Class Ⅱ
GB/T 5662
GB/T 9112
GB/T 9124
GB/T 12224-2005 — General requirements for industrial steel valves
GB/T 20801.1
GB/T 20801.2
GB/T 20801.3
GB/T 20801.4
GB/T 20801.5
GB/T 20801.6
GB 50058
GB 50062
GB 50316
JB/T 4297
JB/T 4711
JB/T 4730.3
JB/T 4730.4
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 20 pages
5 Related standards
Standards on related subjects:
GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method
JB/T 13977-2020 — Liquefied natural gas (LNG) cryogenic submerged pumps
GB/T 7782-2020 — Metering pump
JB/T 11008-2025 — High-speed partial flow pump
JB/T 11172-2025 — Liquid ring compressor
JB/T 11171-2025 — Shielded motor pump for lithium bromide absorption air conditioner
6 Classification and status
International classification (ICS): 23.080
Chinese Standard Classification (CCS): J 71
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 1047Pipework components - Definition and selection of nominal size
- GB/T 1048Pipework components - Definition and selection of nominal pressure
- GB/T 3216Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1, 2 and 3 [including 2018XG1]
- GB/T 3323Radiographic examination of fusion welded joints in metallic materials
- GB 4272General Principles for Thermal Insulation Technique of Equipments and
Similar standards
How to Download JB/T 11170-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
JB/T 11170-2011
$345.00