JB/T 4297-2021Pump products - Painting - Technical requirements (English PDF)
泵产品涂漆 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4297-2021 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 2, 2021
Implementation date
April 1, 2022
Scope
JB/T 4297-2021 is the English-translated version of 泵产品涂漆 技术条件.
JB/T 4297-2021 is the Chinese machinery industry standard covering pump products - Painting - Technical requirements. It was issued on 2 December 2021 and has been in force since 1 April 2022, replacing JB/T 4297-2008.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2021 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4297-2021
National Standard of the People's Republic of China
- Replacing
- JB/T 4297-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 4297-2021 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 2 December 2021 and has been in force since 1 April 2022.
It replaces the earlier edition JB/T 4297-2008, JB/T 4297-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 4297-2021 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 4297-2008 (earlier edition)
JB/T 4297-1992 (earlier edition)
Standards on related subjects:
GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method
JB/T 6879-2021 — Dimensional tolerances of flow passages in castings of centrifugal pumps
GB/T 7782-2020 — Metering pump
JB/T 8697-2026 — Powered diaphragm pump
JB/T 8099-2025 — Rotor heavy oil pump
JB/T 6913-2025 — Pump Product Cleanliness
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 14794-2025Steam reciprocating pump
- GB/T 45165-2024Small high pressure cleaning machines
- GB/T 25141-2022Self-priming rotodynamic pumps
- NB/T 10751-2021Reciprocating pneumatic grouting pump for mine
- GB/T 10886-2019Three screw pumps
- JB/T 13744-2019Prefabricated drainage pumping stations for sewage treatment
Similar standards
Editions of JB/T 4297
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4297-2021 | Pump products - Painting - Technical requirements | current edition | Current |
| JB/T 4297-2008 | Pump products - Painting - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 4297-2021. Earlier editions are listed for reference only.
How to Download JB/T 4297-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 4297-2021
$180.00