Valid

JB/T 10350-2013Wet blasting machines (English PDF)

液体喷砂机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10350-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 10350-2013 is the English-translated version of 液体喷砂机.

JB/T 10350-2013 is a recommended Chinese machinery industry standard for wet blasting machines.

It gives the terms and definitions of the liquid blasting machine, the technical requirements, the testing and inspection, the inspection rules, and the provisions for signs, packaging, transportation and storage, and it also establishes the basis on which blasting quality is determined.

The edition that JB/T 10350-2013 replaces is JB/T 10350-2002. Chinese classification J70 and international classification 23.100 are recorded for it. Among the standards it quotes are GB/T 1186, GB 5226.1, GB/T 7932, GB 20426, HG/T 2184, JB/T 4297 and GB/T 8923.1.

Found what you need?

Document preview — JB/T 10350-2013

National Standard of the People's Republic of China

ICS
23.100
Replacing
JB/T 10350-2002

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10350-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It replaces the earlier edition JB/T 10350-2002.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for wet blasting machines. It gives the terms and definitions of the liquid blasting machine, the technical requirements, the testing and inspection, the inspection rules, and the provisions for signs, packaging, transportation and storage, and it also establishes the basis on which blasting quality is determined. The edition that JB/T 10350-2013 replaces is JB/T 10350-2002. Chinese classification J70 and international classification 23.100 are recorded for it. Among the standards it quotes are GB/T 1186, GB 5226.1, GB/T 7932, GB 20426, HG/T 2184, JB/T 4297 and GB/T 8923.1.

JB/T 10350-2013 falls under ICS 23.100, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GBZ/T 192.1

GBZ/T 192.3

GBZ/T 192.4

GB/T 1186

GB 5226.1

GB/T 7932

GB/T 9969

GB/T 13288.2-2011 — Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure

GB 15763.2

GB 20426

HG/T 2184

HG/T 2192

JB/T 4297

GB/T 8923.4

GB/T 8923.1

GB/T 8923.2

GB/T 8923.3

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10350-2002 (earlier edition)

Standards on related subjects:

JB/T 6879-2021 — Dimensional tolerances of flow passages in castings of centrifugal pumps

GB/T 7782-2020 — Metering pump

JB/T 6880.1-2013 — Grey iron castings for pumps

JB/T 15211-2025 — Fully Enclosed Volumetric Refrigerant Compressors for Low Ambient Temperature Air Source Heat Pumps

JB/T 15180-2025 — Water Jet Nozzle Performance Test Methods

JB/T 10349-2013 — Dry blasting machines

6 Classification and status

International classification (ICS): 23.100

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

Editions of JB/T 10350

EditionTitleRevisionStatus
JB/T 10350-2013Wet blasting machinescurrent editionCurrent
JB/T 10350-2002Wet blasting machinesprevious editionSuperseded

This page sells the current edition, JB/T 10350-2013. Earlier editions are listed for reference only.

How to Download JB/T 10350-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10350-2013

$225.00