Valid

JB/T 7743-2011Vortex pump (English PDF)

旋涡泵

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7743-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 15, 2011

Implementation date

November 1, 2011

Scope

JB/T 7743-2011 is the English-translated version of 旋涡泵.

JB/T 7743-2011 is a recommended Chinese machinery industry standard on the vortex pump, named simply the pump in the text. It covers the type, the model designation, the basic parameters and the direction of rotation, then the technical requirements, tests and test methods, inspection rules, marking, manual, packaging, transport and storage.

It applies to mechanical seal pumps handling liquid of kinematic viscosity below 37.4 mm2/s and to magnetic drive pumps for flammable, explosive, volatile, toxic, corrosive and costly liquids.

The delivered liquid temperature runs from -20 °C to 120 °C for the mechanical seal pump and from -20 °C to 250 °C for the magnetic drive pump. It supersedes JB/T 7743-1995.

Found what you need?

Document preview — JB/T 7743-2011

National Standard of the People's Republic of China

ICS
23.080
Replacing
JB/T 7743-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 7743-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.

It replaces the earlier edition JB/T 7743-1995.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard on the vortex pump, named simply the pump in the text. It covers the type, the model designation, the basic parameters and the direction of rotation, then the technical requirements, tests and test methods, inspection rules, marking, manual, packaging, transport and storage. It applies to mechanical seal pumps handling liquid of kinematic viscosity below 37.4 mm2/s and to magnetic drive pumps for flammable, explosive, volatile, toxic, corrosive and costly liquids. The delivered liquid temperature runs from -20 °C to 120 °C for the mechanical seal pump and from -20 °C to 250 °C for the magnetic drive pump. It supersedes JB/T 7743-1995.

JB/T 7743-2011 falls under ICS 23.080, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2828.1

GB/T 3216-2005 — Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2

GB/T 3217

GB/T 4180

GB/T 4879-1999 — Rustproof packaging

GB/T 5656-2008 — Technical specification for centrifugal pumps -- Class Ⅱ

GB/T 6391

GB/T 9124

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

GB/T 13306

GB/T 13384

GB/T 13560

JB/T 4297

JB/T 6880.1

JB/T 6880.2

JB/T 7757.2

JB/T 8097-1999 — Methods for measurement and evaluation of vibration of pumps

JB/T 8098-1999 — Methods for measurement and evaluation of noise of pumps

JB/T 8726

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 7743-1995 (earlier edition)

Standards on related subjects:

GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method

GB/T 7782-2020 — Metering pump

JB/T 6880.1-2013 — Grey iron castings for pumps

JB/T 8099-2025 — Rotor heavy oil pump

JB/T 6913-2025 — Pump Product Cleanliness

JB/T 7742-2013 — Magnetic drive centrifugal pumps

6 Classification and status

International classification (ICS): 23.080

Chinese Standard Classification (CCS): J 71

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Editions of JB/T 7743

EditionTitleRevisionStatus
JB/T 7743-2011Vortex pumpcurrent editionCurrent
JB/T 7743-1995Vortex pumpprevious editionSuperseded

This page sells the current edition, JB/T 7743-2011. Earlier editions are listed for reference only.

How to Download JB/T 7743-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7743-2011

$195.00