Valid

JB/T 11007-2010High shear homogenizing pumps and emulsifying pumps (English PDF)

高剪切匀浆泵、乳化泵

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11007-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 11007-2010 is the English-translated version of 高剪切匀浆泵、乳化泵.

JB/T 11007-2010 is a recommended Chinese machinery industry standard for high shear homogenizing pumps and high shear emulsifying pumps. It sets out their types and basic parameters, technical requirements, testing and inspection, the delivery of the pumps, marking, packaging, transport and storage, together with guarantee matters.

It applies to horizontal between-bearing high shear homogenizing pumps handling materials with a viscosity below 50000 mPa.s, and to horizontal cantilever emulsifying pumps handling materials with a viscosity below 1500 mPa.s.

The standard carries Chinese classification J71 and international classification 23.080. Among the standards it quotes are GB/T 3215-2007, GB/T 9239.1-2006 and JB/T 4297.

Found what you need?

Document preview — JB/T 11007-2010

National Standard of the People's Republic of China

ICS
23.080

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11007-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for high shear homogenizing pumps and high shear emulsifying pumps. It sets out their types and basic parameters, technical requirements, testing and inspection, the delivery of the pumps, marking, packaging, transport and storage, together with guarantee matters. It applies to horizontal between-bearing high shear homogenizing pumps handling materials with a viscosity below 50000 mPa.s, and to horizontal cantilever emulsifying pumps handling materials with a viscosity below 1500 mPa.s. The standard carries Chinese classification J71 and international classification 23.080. Among the standards it quotes are GB/T 3215-2007, GB/T 9239.1-2006 and JB/T 4297.

JB/T 11007-2010 falls under ICS 23.080, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1032

GB/T 1348

GB/T 2100

GB/T 3215-2007 — Centrifugal pumps for petroleum petrochemical and natural gas industries

GB/T 3216

GB/T 4662

GB/T 4879

GB/T 6391

GB/T 7021

GB/T 9112

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

GB/T 9439

GB/T 11352

GB/T 13306

GB/T 13384

JB/T 4127.1

JB/T 4127.3

JB/T 4297

JB/T 8097-1999 — Methods for measurement and evaluation of vibration of pumps

JB/T 8098-1999 — Methods for measurement and evaluation of noise of pumps

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method

JB/T 13977-2020 — Liquefied natural gas (LNG) cryogenic submerged pumps

GB/T 7782-2020 — Metering pump

JB/T 11172-2025 — Liquid ring compressor

JB/T 11171-2025 — Shielded motor pump for lithium bromide absorption air conditioner

JB/T 11008-2025 — High-speed partial flow pump

6 Classification and status

International classification (ICS): 23.080

Chinese Standard Classification (CCS): J 71

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11007-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11007-2010

$165.00