JB/T 4127.3-2011Mechanical seals - Part 3: Technical requirements for product acceptance (English PDF)
机械密封 第3部分:产品验收技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4127.3-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 4127.3-2011 is the English-translated version of 机械密封 第3部分:产品验收技术条件.
JB/T 4127.3-2011 is the recommended Chinese machinery industry standard covering product acceptance within the parts on mechanical seals.
It sets the acceptance items and rules, the packaging, marking and technical documents, the inspection of appearance quality, the installation dimensions and the accuracy of the main components, the hydrostatic test and the running test, the storage conditions and the assurance given in use, so that users have a technical basis for the quality inspection and acceptance of these products.
Mechanical seals for centrifugal pumps and other similar rotating machinery come within its scope, with bounds set on seal chamber pressure and temperature, an outside diameter of shaft or sleeve not greater than 120 mm and a speed below 3000 r/min. It replaces JB/T 4127.3-1999.
Found what you need?
Document preview — JB/T 4127.3-2011
National Standard of the People's Republic of China
- ICS
- 21.140
- Replacing
- JB/T 4127.3-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Technical Requirements
- 4.1 Pallet
- 4.2 Pallet Package
- 5 Measurement and Evaluation Method
- 5.1 Paper Box and Calp Box
- 5.2 Wooden Box
- 6.1 Materials
- 6.2 Dimension and Tolerance
- 6.3 Box Making
- 6.4 Packing
- 6.5 Marks
- 7 Test Method
- 7.1 Material Test
- 7.2 Measurement of Dimensional Tolerance
- 7.3 Appearance Inspection
- 7.4 Property Test
- 8 Inspection rules
- 9 Marking, packaging, transportation and storage
1 Foreword
JB/T 4127.3-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 4127.3-1999.
It is one of 5 parts of the JB/T 4127 series.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard covering product acceptance within the parts on mechanical seals. It sets the acceptance items and rules, the packaging, marking and technical documents, the inspection of appearance quality, the installation dimensions and the accuracy of the main components, the hydrostatic test and the running test, the storage conditions and the assurance given in use, so that users have a technical basis for the quality inspection and acceptance of these products. Mechanical seals for centrifugal pumps and other similar rotating machinery come within its scope, with bounds set on seal chamber pressure and temperature, an outside diameter of shaft or sleeve not greater than 120 mm and a speed below 3000 r/min. It replaces JB/T 4127.3-1999.
JB/T 4127.3-2011 falls under ICS 21.140, in the field of mechanical systems and components.
This catalogue holds 260 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 6556
GB/T 14211
JB/T 4127.1
JB/T 7757.2
4 Where this standard sits
It cites 5 standards, among them GB/T 1184-1996, listed in full above.
It is one part of the JB/T 4127 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 4127.1-1999 — Mechanical seals - Technical specifications
JB/T 4127.1-2013 — Mechanical Seal - Part 1: Specification
JB/T 4127.2-1999 — Mechanical seals - Classification method
JB/T 4127.2-2013 — Mechanical Seal - Part 2: Classification Method
Other editions:
JB/T 4127.3-1999 (earlier edition)
Standards on related subjects:
JB/T 6374-2020 — Silicon carbide sealing rings for mechanical seals - Technical requirements
GB/T 6556-2016 — Type, Main Dimension, Material and Marking of Mechanical Seals
QC/T 716-2004 — Test methods for retention force and insertion force of automotive weatherstrips
JB/T 6614-2025 — Technical specification for mechanical seals for boiler feed pumps
7 Classification and status
International classification (ICS): 21.140
Chinese Standard Classification (CCS): J 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 6556Type,main dimension, material and marking of mechanical seals
- GB/T 14211Test method of mechanical seal
- JB/T 4127.1Mechanical Seal - Part 1: Specification
- JB/T 7757.2Rubber O-rings for mechanical seals
Similar standards
Editions of JB/T 4127.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4127.3-2011 | Mechanical seals - Part 3: Technical requirements for product acceptance | current edition | Current |
| JB/T 4127.3-1999 | Mechanical seals - Part 3: Technical requirements for product acceptance | previous edition | Superseded |
This page sells the current edition, JB/T 4127.3-2011. Earlier editions are listed for reference only.
How to Download JB/T 4127.3-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 14211-1993 — Code for test of machanical seal
GB/T 14211-2010 — Test method of mechanical seal
JB/T 4127.3-2011
$105.00