JB/T 10716-2020Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions (English PDF)
柴油机 直列式喷油泵和共轨系统用高压供油泵平底托架 安装尺寸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10716-2020 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 16, 2020
Implementation date
January 1, 2021
Scope
JB/T 10716-2020 is the English-translated version of 柴油机 直列式喷油泵和共轨系统用高压供油泵平底托架 安装尺寸.
JB/T 10716-2020 is the Chinese machinery industry standard covering diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions.
It was issued on 16 April 2020 and has been in force since 1 January 2021, replacing JB/T 10716-2007. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2020 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10716-2020
National Standard of the People's Republic of China
- Replacing
- JB/T 10716-2007
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Dimensions and tolerances
- Bibliography
- Figure 1 In-line fuel injection pump - Flat base bracket mounting arrangement 1
- Figure 2 In-line fuel injection pump - Flat base bracket mounting arrangement 2
- Figure 3 In-line fuel injection pump - Flat base bracket mounting arrangement 3
- Figure 4 In-line fuel injection pump - Flat base bracket mounting arrangement 4
- Figure 5 Two cylinder high pressure fuel supply pump - Flat base bracket mounting arrangement 5
- Figure 6 Two cylinder high pressure fuel supply pump - Flat base bracket mounting arrangement 6
- Figure 7 Two cylinder high pressure fuel supply pump - Flat base bracket mounting arrangement 7
- Figure 8 Two cylinder high pressure fuel supply pump - Flat base bracket mounting arrangement 8
- Table 1 In-line fuel injection pump - Flat base bracket mounting arrangement 1
- Table 2 In-line fuel injection pump - Flat base bracket mounting arrangement 2
- Table 3 In-line fuel injection pump - Flat base bracket mounting arrangement 3
- Table 4 In-line fuel injection pump - Flat base bracket mounting arrangement 4
What this standard covers
This standard specifies the dimensional requirements for the installation of flat-bottom brackets for in-line fuel injection pumps and high-pressure fuel supply pumps for common rail systems on diesel (compression ignition) engines. This standard applies to in-line fuel injection pumps for diesel (compression ignition) engines and high pressure fuel supply pumps for common rail systems.
Document data
International classification (ICS): 27.020; 43.060.40.
Chinese classification (CCS): J94.
Estimated length of the Chinese original: 10,190 words.
2 Dimensions and tolerances
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 10716
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10716-2020 | Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions | current edition | Current |
| JB/T 10716-2007 | Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions | previous edition | Superseded |
This page sells the current edition, JB/T 10716-2020. Earlier editions are listed for reference only.
How to Download JB/T 10716-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 10716-2020
$90.00