Valid

JB/T 10715.1-2020Diesel engines - End-mounting flange dimensions - Part 1: Fuel injection pumps (English PDF)

柴油机端面法兰安装尺寸第1部分：喷油泵

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10715.1-2020 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 16, 2020

Implementation date

January 1, 2021

Scope

JB/T 10715.1-2020 is the English-translated version of 柴油机端面法兰安装尺寸第1部分：喷油泵.

Part 1 of the JB/T 10715 series is the Chinese machinery industry standard covering the mounting of fuel injection pumps on diesel engines. It sets the dimensional requirements for the installation of nine types of end-face flange used to mount fuel injection pumps, both distributed and in-line types, on diesel (compression ignition) engines.

Those requirements apply to fuel injection pumps for diesel (compression ignition) engines of both kinds. The standard was issued by the Ministry of Industry and Information Technology in 2020 and took effect on 1 January 2021.

Found what you need?

Document preview — JB/T 10715.1-2020

National Standard of the People's Republic of China

ICS: 27.020; 43.060.40
Replacing: JB/T 10715-2007

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Dimensions and tolerances
2.1 General
2.2 Fuel injection pump
Figure 1 Fuel injection pump - End mounting flange 1
Figure 2 Fuel injection pump - End mounting flange 2
Figure 3 Fuel injection pump - End mounting flange 3
Figure 4 Fuel injection pump - End mounting flange 4
Figure 5 Fuel injection pump - End mounting flange 5
Figure 6 Fuel injection pump - End mounting flange 6
Figure 7 Fuel injection pump - End mounting flange 7
Figure 8 Fuel injection pump - End mounting flange 8
Figure 9 Fuel injection pump - End mounting flange 9
Table 1 Dimensions of the end mounting flange 1 of the fuel injection pump
Table 2 Dimensions of the end mounting flange 2 of the fuel injection pump
Table 3 Dimensions of the end mounting flange 3 of the fuel injection pump
Table 4 Dimensions of the end mounting flange 4 of the fuel injection pump
Table 5 Dimensions of the end mounting flange 5 of the fuel injection pump
Table 6 Dimensions of the end mounting flange 6 of the fuel injection pump
Table 7 Dimensions of the end mounting flange 7 of the fuel injection pump
Table 8 Dimensions of the end mounting flange 8 of the fuel injection pump
Table 9 Dimensions of the end mounting flange 9 of the fuel injection pump

What this standard covers

This standard specifies the dimensional requirements for the installation of nine types of end-face flanges of fuel injection pumps (including distributed fuel injection pumps and in-line fuel injection pumps) on diesel (compression ignition) engines. This standard applies to fuel injection pumps for diesel (compression ignition) engines (including distributed fuel injection pumps and in-line fuel injection pumps).

Document data

International classification (ICS): 27.020; 43.060.40.

Chinese classification (CCS): J94.

Estimated length of the Chinese original: 10,156 words.

2 Dimensions and tolerances

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 10715.2-2020|JB/T 10716-2020|JB/T 9728-2010|GB/T 28953-2012|QC/T 785-2007|QC/T 786-2007

Editions of JB/T 10715.1

Edition	Title	Revision	Status
JB/T 10715.1-2020	Diesel engines - End-mounting flange dimensions - Part 1: Fuel injection pumps	current edition	Current
JB/T 10715-2007	Diesel engines - End-mounting flange dimensions - Part 1: Fuel injection pumps	previous edition	Superseded

This page sells the current edition, JB/T 10715.1-2020. Earlier editions are listed for reference only.

How to Download JB/T 10715.1-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.