GB/T 25365.1-2010Electronic control common rail fuel injection system for diesel engines - Specifications - Part 1: Machinery (English PDF)
柴油机电控共轨喷油系统总成 技术条件 第1部分：机械
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25365.1-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 10, 2010
Implementation date
March 1, 2011
Scope
GB/T 25365.1-2010 is the English-translated version of 柴油机电控共轨喷油系统总成 技术条件 第1部分：机械.
GB/T 25365.1-2010 is the Chinese standard "Electronic control common rail fuel injection system for diesel engines - Specifications - Part 1: Machinery".
Its scope clause reads: This section GB/T 25365 specifies the electrical control common rail diesel fuel injection systems (mechanical part) the technical requirements, test methods, Signs, packaging, transport and storage.
This section applies to automobiles, engineering machinery, diesel generators and marine electrical control common rail fuel injection system assembly of the mechanical parts (to Hereinafter referred to as electronically controlled common rail system). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 25365.1-2010
National Standard of the People's Republic of China
- ICS
- 27.020
- Classification
- J 94
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Common Rail fuel injection system
- 3.2 Electronically controlled common rail fuel injection system electroniccontrolCR (fuel)
1 Scope
This section GB/T 25365 specifies the electrical control common rail diesel fuel injection systems (mechanical part) the technical requirements, test methods,
Signs, packaging, transport and storage.
This section applies to automobiles, engineering machinery, diesel generators and marine electrical control common rail fuel injection system assembly of the mechanical parts (to
Hereinafter referred to as electronically controlled common rail system).
2 Normative references
The following documents contain provisions which, through reference GB/T 25365 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB 252-2000 light diesel oil
GB/T 8029 diesel injection pump (GB/T 8029-2010, ISO 4113. 1988, Roadvehicles-
Calibrationfluidfordieselinjectionequipment, NEQ)
GB/T 10826.5-2008 fuel injection means Vocabulary - Part 5. Common rail fuel injection system (ISO 7876-5.
2004, IDT)
GB 19147 diesel (GB 19147-2009, EN590.1990, MOD)
GB/T 25366 electronically controlled common rail diesel injection system common rail assembly technical conditions
GB/T 25367 electronically controlled common rail diesel fuel injection system fuel injector assembly technical conditions
GB/T 25368 electronically controlled common rail diesel fuel injection system for high-pressure oil pump assembly technical conditions
GJB3075 military specification diesel
JB/T 8121 diesel fuel injection pump test bench with high-pressure hose assembly
JB/T 9734 fuel injection pump test bench conditions
ISO 4113 Road vehicles - diesel injection pump oil school
3 Terms and Definitions
GB/T 10826.5-2008 and established the following terms and definitions apply GB/T 25365 in this section.
3.1 Common Rail fuel injection system
Common Rail Injection System CR (fuel) injectionsystem
Common Rail System CR (fuelinjection) system
In common rail (3.3) high-pressure fuel injection system component characterization for supplying high pressure fuel to the respective common rail injector (3.5), and Save
Less high-pressure system pressure pulses.
3.2 Electronically controlled common rail fuel injection system electroniccontrolCR (fuel)
Common rail fuel injection system is electronically controlled.
GB/T 8243.7-2017 | GB/T 1859.1-2015 | JB/T 11880.8-2014 | GB/T 25367-2024 | GB/T 25368-2023 | GB/T 25366-2022 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 25365.1-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 25365.1-2010
$85.00