Valid

JB/T 8687-2013Sampling inspection for pump products (English PDF)

泵类产品 抽样检验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8687-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 8687-2013 is the English-translated version of 泵类产品 抽样检验.

JB/T 8687-2013 is the recommended Chinese machinery industry standard on sampling inspection of pump products. It fixes the inspection levels and the acceptance quality limit, the AQL, to be used when such products are sampled.

Those two figures are what a sampling scheme drawn up under the standard rests on. The document is written for batch sampling by pump manufacturers, where the same product or the same components are turned out in quantity under identical conditions.

It carries the Chinese classification J71, and it quotes GB/T 2828.1-2003. It replaces the 1998 edition, JB/T 8687-1998.

Found what you need?

Document preview — JB/T 8687-2013

National Standard of the People's Republic of China

Replacing
JB/T 8687-1998

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8687-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It replaces the earlier edition JB/T 8687-1998.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended Chinese machinery industry standard on sampling inspection of pump products. It fixes the inspection levels and the acceptance quality limit, the AQL, to be used when such products are sampled. Those two figures are what a sampling scheme drawn up under the standard rests on. The document is written for batch sampling by pump manufacturers, where the same product or the same components are turned out in quantity under identical conditions. It carries the Chinese classification J71, and it quotes GB/T 2828.1-2003. It replaces the 1998 edition, JB/T 8687-1998.

JB/T 8687-2013 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 8687-1998 (earlier edition)

Standards on related subjects:

GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method

GB/T 7782-2020 — Metering pump

JB/T 6880.1-2013 — Grey iron castings for pumps

JB/T 6913-2025 — Pump Product Cleanliness

JB/T 8697-2014 — Diaphragm Pump

JB/T 8688-2013 — Plastic Centrifugal Pumps

6 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 8687

EditionTitleRevisionStatus
JB/T 8687-2013Sampling inspection for pump productscurrent editionCurrent
JB/T 8687-1998Sampling inspection for pump productsprevious editionSuperseded

This page sells the current edition, JB/T 8687-2013. Earlier editions are listed for reference only.

How to Download JB/T 8687-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8687-2013

$85.00