JB/T 10349-2013Dry blasting machines (English PDF)
干式喷砂机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10349-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 10349-2013 is the English-translated version of 干式喷砂机.
JB/T 10349-2013 is a recommended Chinese machinery industry standard for dry blasting machines.
It sets out the terms and definitions, the technical requirements, the testing and inspection, the inspection rules and the provisions for marking, packaging, transportation and storage, and it also gives the basis on which blasting quality is assessed and determined.
The standard replaces JB/T 10349-2002. In the Chinese system it is classified J70, and in the international one 25.220.20. Among the standards it quotes are GB/T 1186, GB 5226.1, GB/T 7932, GB/T 13288.2-2011, GB 20426 and JB/T 4711.
Found what you need?
Document preview — JB/T 10349-2013
National Standard of the People's Republic of China
- ICS
- 25.220.20
- Replacing
- JB/T 10349-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 10349-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 10349-2002.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for dry blasting machines. It sets out the terms and definitions, the technical requirements, the testing and inspection, the inspection rules and the provisions for marking, packaging, transportation and storage, and it also gives the basis on which blasting quality is assessed and determined. The standard replaces JB/T 10349-2002. In the Chinese system it is classified J70, and in the international one 25.220.20. Among the standards it quotes are GB/T 1186, GB 5226.1, GB/T 7932, GB/T 13288.2-2011, GB 20426 and JB/T 4711.
JB/T 10349-2013 falls under ICS 25.220.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GBZ/T 192.1
GBZ/T 192.3
GBZ/T 192.4
GB/T 1186
GB 5226.1
GB/T 7932
GB/T 9019
GB/T 9969
GB/T 13288.2-2011 — Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure
GB 15763.2
GB 20426
GB/T 25198
HG/T 2192
JB/T 4297
JB/T 4711
TSG R0004
TSG R0005
GB/T 8923.4
GB 150.1
GB 150.2
GB 150.3
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10349-2002 (earlier edition)
Standards on related subjects:
JB/T 6879-2021 — Dimensional tolerances of flow passages in castings of centrifugal pumps
GB/T 7782-2020 — Metering pump
JB/T 6880.1-2013 — Grey iron castings for pumps
JB/T 15211-2025 — Fully Enclosed Volumetric Refrigerant Compressors for Low Ambient Temperature Air Source Heat Pumps
JB/T 15180-2025 — Water Jet Nozzle Performance Test Methods
JB/T 10350-2013 — Wet blasting machines
6 Classification and status
International classification (ICS): 25.220.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GBZ/T 192.1Determination of dust in the
- GBZ/T 192.3Determination of dust in the
- GBZ/T 192.4Determination of dust in the
- GB/T 1186Rubber hoses, textile-reinforced, for compressed air -- Specification
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
TSG R0004 · TSG R0005
Similar standards
Editions of JB/T 10349
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10349-2013 | Dry blasting machines | current edition | Current |
| JB/T 10349-2002 | Dry blasting machines | previous edition | Superseded |
This page sells the current edition, JB/T 10349-2013. Earlier editions are listed for reference only.
How to Download JB/T 10349-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 10349-2013
$195.00