JB/T 12211-2015Sand Blasting room (English PDF)
喷砂房
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12211-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12211-2015 is the English-translated version of 喷砂房.
JB/T 12211-2015 is the Chinese machinery industry standard for sandblasting rooms. It fixes the terms and definitions and the basic parameters, then the technical requirements, the test and inspection methods, the inspection rules and the marking, packaging and transport.
It applies to sandblasting rooms working at a compressed air pressure of 0.5 MPa to 1.0 MPa with an abrasive as the working medium, and with a studio projection area from 10 m2 to 400 m2.
Among the standards it quotes are GB 4053.1, GB/T 5700, GB 12348, GB 16297, GB 50231, GBZ 2.1 and TSG D3001.
Found what you need?
Document preview — JB/T 12211-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12211-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for sandblasting rooms. It fixes the terms and definitions and the basic parameters, then the technical requirements, the test and inspection methods, the inspection rules and the marking, packaging and transport. It applies to sandblasting rooms working at a compressed air pressure of 0.5 MPa to 1.0 MPa with an abrasive as the working medium, and with a studio projection area from 10 m2 to 400 m2. Among the standards it quotes are GB 4053.1, GB/T 5700, GB 12348, GB 16297, GB 50231, GBZ 2.1 and TSG D3001.
JB/T 12211-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB 4053.1
GB 4053.2
GB 4053.3
GB/T 5226.1
GB/T 5700
GB/T 8923.1
GB 12348
GB/T 13288.1
GB 15763.2
GB 16297
GB 50034
GB 50231
GB 50243
GB 50270
GB 50275
GB 50575
GBZ 2.1
GBZ/T 189.8
JB/T 10349
TSG D3001
TSG R3001
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method
JB/T 6879-2021 — Dimensional tolerances of flow passages in castings of centrifugal pumps
JB/T 13977-2020 — Liquefied natural gas (LNG) cryogenic submerged pumps
JB/T 15180-2025 — Water Jet Nozzle Performance Test Methods
JB/T 12213-2015 — Adjustable jet pump equipment for technical water supply of hydropower stations
JB/T 12212-2015 — Two-component airless spraying machines
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 4053.1Safety requirements for fixed metal ladders and platform - Part 1: Vertical ladders
- GB 4053.2Safety requirements for fixed metal ladders and platform - Part 2: Inclined ladders
- GB 4053.3Safety requirements for fixed metal ladders and platform - Part 3: Industrial guardrails and platform
- GB/T 5226.1Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 5700Methods of lighting measurement
TSG D3001 · TSG R3001
How to Download JB/T 12211-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12348-1990 — Standard of noise at boundary of industrial enterprises
GB 12348-2008 — Emission standard for industrial enterprises noise at boundary
GB 15763.2-2005 — Safety glazing materials in building - Part 2: Tempered glass
JB/T 12211-2015
$269.00