JB/T 4730.4-2005Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing (English PDF)
承压设备无损检测 第4部分:磁粉检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4730.4-2005 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 26, 2005
Implementation date
November 1, 2005
Scope
JB/T 4730.4-2005 is the English-translated version of 承压设备无损检测 第4部分:磁粉检测.
JB/T 4730.4-2005 is the Chinese machinery industry standard covering non-destructive testing of pressure equipment, Part 4: Magnetic particle testing. It was issued on 26 July 2005 and has been in force since 1 November 2005, replacing JB 4730-1994.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4730.4-2005
National Standard of the People's Republic of China
- Replacing
- JB 4730-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 General Requirements
- 4 Testing methods
- 5 Classifications and Record of Magnetic Trace Indications
- 6 Retesting
- 7 Demagnetization
- 8 Magnetic Particles Testing on Pressure Equipments
- 9 Quality Classification of Magnetic Particle Testing
1 Foreword
JB/T 4730.4-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2005 and has been in force since 1 November 2005.
It is one of 9 parts of the JB/T 4730 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This part in JB/T 4730 specifies the magnetic particle testing methods and quality classification requirements of pressure equipments. This part is applicable to the testing of the raw materials, spare parts and welded joint surfaces and near surface defects of those pressure equipments manufactured from ferromagnetic materials but is not applicable to the testing of the austenitic stainless steel and other non-ferromagnetic materials. The support parts and structural member related to pressure equipments also may be carried out with magnetic particle testing by making reference to this part as required.
JB/T 4730.4-2005 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
8 other standards in this catalogue cite it, among them HG/T 3914-2006, HG/T 4176-2011, JB/T 11486-2013.
It is one part of the JB/T 4730 series, of which this catalogue holds 9 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4730.1-2005 — Part 1: General requirements
JB/T 4730.2-2005 — Part 2: Radiographic testing
JB/T 4730.3-2005 — Part 3: Ultrasonic testing
JB/T 4730.5-2005 — Part 5: Penetrant testing
JB/T 4730.6-2005 — Part 6: Eddy current testing
JB/T 4730.7-2012 — Chinese standard
JB/T 4730.8-2012 — Nondestructive testing of pressure equipments - Part 8: Leak Testing
JB/T 4730.9-2012 — Chinese standard
Standards on related subjects:
GB/T 4162-2022 — Method for ultrasonic testing of forged and rolled steel bars
GB/T 5193-2020 — Method of ultrasonic inspection for wrought titanium and titanium alloy products
YB/T 4083-2011 — Measurement method of comprehensive properties for automatic eddy current flaw detection system for steel tubes
6 Classification and status
Chinese Standard Classification (CCS): H 26
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- CJ/T 504-2016Cable with the sheath of high density polyethylene
- NB/T 31082-2016High strength bolt connection sets for wind turbine towers
- JB/T 12228-2015Single/double-action horizontal aluminium extrusion presses
- JB/T 12229-2015Double-column inclined open-die forging hydraulic presses with direct oil pump drive
- NB/T 20354.3-2015Design and manufacturing specification of steam turbine rotors for pressurized water reactor nuclear power plants - Part 3: Welded rotor
- NB/T 35051-2015Code for manufacture, erection and acceptance of gate hoists in hydropower projects
Similar standards
Editions of JB/T 4730.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4730.4-2005 | Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing | current edition | Current |
| JB 4730-1994 | Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing | previous edition | Superseded |
This page sells the current edition, JB/T 4730.4-2005. Earlier editions are listed for reference only.
How to Download JB/T 4730.4-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4730.5-2005 — Non-destructive testing of pressure equipment - Part 5: Penetrant testing
JB/T 4730.3-2005 — Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
JB/T 4730.6-2005 — Non-destructive testing of pressure equipment - Part 6: Eddy current testing
JB/T 4730.4-2005
$85.00