HG/T 4176-2011Pneumatic triple-offset butterfly valves - General technical specifications (English PDF)
气动三偏心蝶阀通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4176-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4176-2011 is the English-translated version of 气动三偏心蝶阀通用技术条件.
The general technical specification for pneumatic triple-offset butterfly valves is HG/T 4176-2011, a recommended standard of the Chinese chemical industry.
It provides the terms and definitions and the classification of these valves, then states the requirements, the test methods, the inspection rules and the rules for marking, packaging and storage.
It is written for pneumatic triple-offset butterfly valves with hard seals, composite seals or soft seals, and extends to the selection of the pneumatic actuator.
The documents it quotes include GB 150, GB/T 12220, GB/T 12224, GB/T 12229, GB/T 12230, GB/T 13384, GB/T 17213.2, parts 1 to 10 of JB/T 4730 and the earlier JB 4730-1994. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4176-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4176-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The general technical specification for pneumatic triple-offset butterfly valves is HG/T 4176-2011, a recommended standard of the Chinese chemical industry. It provides the terms and definitions and the classification of these valves, then states the requirements, the test methods, the inspection rules and the rules for marking, packaging and storage. It is written for pneumatic triple-offset butterfly valves with hard seals, composite seals or soft seals, and extends to the selection of the pneumatic actuator. The documents it quotes include GB 150, GB/T 12220, GB/T 12224, GB/T 12229, GB/T 12230, GB/T 13384, GB/T 17213.2, parts 1 to 10 of JB/T 4730 and the earlier JB 4730-1994.
HG/T 4176-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB 150
GB/T 12220
GB/T 12224
GB/T 12229
GB/T 12230
GB/T 13384
GB/T 17213.2
JB/T 4730.3-2005 — Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
JB/T 4730.4-2005 — Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing
JB/T 4730.5-2005 — Non-destructive testing of pressure equipment - Part 5: Penetrant testing
JB/T 4730.10-2010
JB/T 4730.8-2012 — Nondestructive testing of pressure equipments - Part 8: Leak Testing
JB/T 4730.9-2012 — Chinese standard
JB/T 4730.1-2005 — Non-destructive testing of pressure equipment - Part 1: General requirements
JB/T 4730.2-2005 — Non-destructive testing of pressure equipment - Part 2: Radiographic testing
JB/T 4730.6-2005 — Non-destructive testing of pressure equipment - Part 6: Eddy current testing
JB/T 4730.7-2012 — Chinese standard
JB 4730-1994 — Nondestructive testing of pressure equipments. Part 1: General requirements
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 4178-2011 — Intelligent dual-cup flash point testers
HG/T 4177-2011 — Automatic complete units for lime milk preparation
HG/T 4175-2011 — General technical requirements for instrument power supply systems in chemical plants
6 Classification and status
Chinese Standard Classification (CCS): G 97
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 12220Industrial valves—Marking
- GB/T 12224General requirements for industrial steel valves
- GB/T 12229General purpose Industrial valves - Technical specification for carbon steel castings
- GB/T 12230General purpose industrial valves - Specification of stainless steel castings
- GB/T 13384General specifications for packing of mechanical and electrical product
JB/T 4730.10-2010
Similar standards
How to Download HG/T 4176-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 4176-2011
$90.00