Valid

JB/T 4730.8-2012Nondestructive testing of pressure equipments - Part 8: Leak Testing (English PDF)

承压设备无损检测 第8部分:泄漏检测

Preview PDF

This is a limited preview

Buy now to download the full PDF (34 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4730.8-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 4, 2012

Implementation date

March 1, 2012

Scope

JB/T 4730.8-2012 is the English-translated version of 承压设备无损检测 第8部分:泄漏检测.

Leak testing is the subject of part 8 of JB/T 4730, the Chinese machinery industry recommended standard on the nondestructive testing of pressure equipment. JB/T 4730.8-2012 specifies the leak detection methods for pressure equipment.

It applies to leak detection and to the location of leaks in the manufacture and the use of pressure equipment, and it can also serve for the measurement that determines the leak rate.

Its Chinese classification is H26 and its international classification 77.040.20. The standard is declared a non-equivalent adoption of ASTM E1066-95R06. It quotes GB 11533, GB/T 12604.7, JB/T 4730.1 and NB/T 47013.7.

Found what you need?

Document preview — JB/T 4730.8-2012

National Standard of the People's Republic of China

ICS
77.040.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 4730.8-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 January 2012 and has been in force since 1 March 2012.

It is one of 9 parts of the JB/T 4730 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Leak testing is the subject of part 8 of JB/T 4730, the Chinese machinery industry recommended standard on the nondestructive testing of pressure equipment. JB/T 4730.8-2012 specifies the leak detection methods for pressure equipment. It applies to leak detection and to the location of leaks in the manufacture and the use of pressure equipment, and it can also serve for the measurement that determines the leak rate. Its Chinese classification is H26 and its international classification 77.040.20. The standard is declared a non-equivalent adoption of ASTM E1066-95R06. It quotes GB 11533, GB/T 12604.7, JB/T 4730.1 and NB/T 47013.7.

JB/T 4730.8-2012 falls under ICS 77.040.20, in the field of metallurgy.

This catalogue holds 222 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 11533

GB/T 12604.7

JB/T 4730.1

NB/T 47013.7

4 Where this standard sits

It cites 4 standards, listed in full above.

One other standard in this catalogue cites it: HG/T 4176-2011.

It is one part of the JB/T 4730 series, of which this catalogue holds 9 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 34 pages

6 Related standards

Other parts of this standard:

JB/T 4730.1-2005 — Non-destructive testing of pressure equipment - Part 1: General requirements

JB/T 4730.2-2005 — Non-destructive testing of pressure equipment - Part 2: Radiographic testing

JB/T 4730.3-2005 — Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing

JB/T 4730.4-2005 — Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing

JB/T 4730.5-2005 — Non-destructive testing of pressure equipment - Part 5: Penetrant testing

JB/T 4730.6-2005 — Non-destructive testing of pressure equipment - Part 6: Eddy current testing

JB/T 4730.7-2012 — Chinese standard

JB/T 4730.9-2012 — Chinese standard

Standards on related subjects:

GB/T 4162-2022 — Method for ultrasonic testing of forged and rolled steel bars

GB/T 5193-2020 — Method of ultrasonic inspection for wrought titanium and titanium alloy products

YB/T 4083-2011 — Measurement method of comprehensive properties for automatic eddy current flaw detection system for steel tubes

7 Classification and status

International classification (ICS): 77.040.20

Chinese Standard Classification (CCS): H 26

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 4730.8-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
34 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4730.8-2012

$515.00