Valid

JB/T 4730.1-2005Non-destructive testing of pressure equipment - Part 1: General requirements (English PDF)

承压设备无损检测 第1部分 通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4730.1-2005 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 26, 2005

Implementation date

November 1, 2005

Scope

JB/T 4730.1-2005 is the English-translated version of 承压设备无损检测 第1部分 通用要求.

JB/T 4730.1-2005 is the Chinese machinery industry standard covering non-destructive testing of pressure equipment, Part 1: General requirements. It was issued on 26 July 2005 and has been in force since 1 November 2005, replacing JB/T 4730-1994.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 4730.1-2005

National Standard of the People's Republic of China

Replacing
JB/T 4730-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 4730.1-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2005 and has been in force since 1 November 2005.

It is one of 9 parts of the JB/T 4730 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 4730.1-2005 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Where this standard sits

2 other standards in this catalogue cite it, among them HG/T 4176-2011, JB/T 3266-2015.

It is one part of the JB/T 4730 series, of which this catalogue holds 9 parts.

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 4730.2-2005 — Part 2: Radiographic testing

JB/T 4730.3-2005 — Part 3: Ultrasonic testing

JB/T 4730.4-2005 — Part 4: Magnetic particle testing

JB/T 4730.5-2005 — Part 5: Penetrant testing

JB/T 4730.6-2005 — Part 6: Eddy current testing

JB/T 4730.7-2012 — Chinese standard

JB/T 4730.8-2012 — Nondestructive testing of pressure equipments - Part 8: Leak Testing

JB/T 4730.9-2012 — Chinese standard

Standards on related subjects:

GB/T 4162-2022 — Method for ultrasonic testing of forged and rolled steel bars

GB/T 5193-2020 — Method of ultrasonic inspection for wrought titanium and titanium alloy products

YB/T 4083-2011 — Measurement method of comprehensive properties for automatic eddy current flaw detection system for steel tubes

6 Classification and status

Chinese Standard Classification (CCS): H 26

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4730.1

EditionTitleRevisionStatus
JB/T 4730.1-2005Non-destructive testing of pressure equipment - Part 1: General requirementscurrent editionCurrent
JB/T 4730-1994Non-destructive testing of pressure equipment - Part 1: General requirementsprevious editionSuperseded

This page sells the current edition, JB/T 4730.1-2005. Earlier editions are listed for reference only.

How to Download JB/T 4730.1-2005

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4730.1-2005

$55.00