JB/T 4730.6-2005Non-destructive testing of pressure equipment - Part 6: Eddy current testing (English PDF)
承压设备无损检测 第6部分 涡流检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4730.6-2005 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 26, 2005
Implementation date
November 1, 2005
Scope
JB/T 4730.6-2005 is the English-translated version of 承压设备无损检测 第6部分 涡流检测.
JB/T 4730.6-2005 is the Chinese machinery industry standard covering non-destructive testing of pressure equipment, Part 6: Eddy current testing. It was issued on 26 July 2005 and has been in force since 1 November 2005, replacing JB 4730-1994.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2005 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4730.6-2005
National Standard of the People's Republic of China
- Replacing
- JB 4730-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 4730.6-2005 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2005 and has been in force since 1 November 2005.
It is one of 9 parts of the JB/T 4730 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 4730.6-2005 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Where this standard sits
One other standard in this catalogue cites it: HG/T 4176-2011.
It is one part of the JB/T 4730 series, of which this catalogue holds 9 parts.
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4730.1-2005 — Part 1: General requirements
JB/T 4730.2-2005 — Part 2: Radiographic testing
JB/T 4730.3-2005 — Part 3: Ultrasonic testing
JB/T 4730.4-2005 — Part 4: Magnetic particle testing
JB/T 4730.5-2005 — Part 5: Penetrant testing
JB/T 4730.7-2012 — Chinese standard
JB/T 4730.8-2012 — Nondestructive testing of pressure equipments - Part 8: Leak Testing
JB/T 4730.9-2012 — Chinese standard
Standards on related subjects:
GB/T 4162-2022 — Method for ultrasonic testing of forged and rolled steel bars
GB/T 5193-2020 — Method of ultrasonic inspection for wrought titanium and titanium alloy products
YB/T 4083-2011 — Measurement method of comprehensive properties for automatic eddy current flaw detection system for steel tubes
6 Classification and status
Chinese Standard Classification (CCS): H 26
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB 12337-2014Steel spherical tanks
- GB/T 12337-2014Steel spherical tanks
- NB/T 25028-2014Technical guidance for repair welding of turbine rotor of nuclear power plant
- NB/T 47041-2014Vertical vessels supported by skirt
- JB/T 7659.1-2013Auxiliary equipment for refrigerating plants - Part 1: Accumulators
- JB/T 8822-2013Technical Condition of High Temperature Centrifugal Fan
Similar standards
Editions of JB/T 4730.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4730.6-2005 | Non-destructive testing of pressure equipment - Part 6: Eddy current testing | current edition | Current |
| JB 4730-1994 | Non-destructive testing of pressure equipment - Part 6: Eddy current testing | previous edition | Superseded |
This page sells the current edition, JB/T 4730.6-2005. Earlier editions are listed for reference only.
How to Download JB/T 4730.6-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4730.7-2012 — Chinese standard
JB/T 4730.5-2005 — Non-destructive testing of pressure equipment - Part 5: Penetrant testing
JB/T 4730.8-2012 — Nondestructive testing of pressure equipments - Part 8: Leak Testing
JB/T 4730.6-2005
$55.00