HG/T 20677-2013Design code for chemical equipment with rubber lining (English PDF)
橡胶衬里化工设备设计规范
This is a limited preview
Buy now to download the full PDF (51 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20677-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 20677-2013 is the English-translated version of 橡胶衬里化工设备设计规范.
The design of rubber-lined chemical equipment is covered by HG/T 20677-2013, a recommended standard of the Chinese chemical industry. It deals with rubber applied as a corrosion- and wear-resistant lining on steel and cast iron chemical equipment and on lined pipe and fittings that carry process media.
Its provisions also extend to rubber lining used as an isolating layer in composite equipment. Design and testing are tied to national and industry documents such as GB 150, GB/T 528-2009, GB/T 531.1-2008, GB/T 1690-2006, GB/T 7760-2003, GB 50236, HG/T 20569 and JB/T 4711-2003.
The code replaces HG/T 20677-1990. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 20677-2013
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 20677-1990
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 20677-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
It replaces the earlier edition HG/T 20677-1990.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The design of rubber-lined chemical equipment is covered by HG/T 20677-2013, a recommended standard of the Chinese chemical industry. It deals with rubber applied as a corrosion- and wear-resistant lining on steel and cast iron chemical equipment and on lined pipe and fittings that carry process media. Its provisions also extend to rubber lining used as an isolating layer in composite equipment. Design and testing are tied to national and industry documents such as GB 150, GB/T 528-2009, GB/T 531.1-2008, GB/T 1690-2006, GB/T 7760-2003, GB 50236, HG/T 20569 and JB/T 4711-2003. The code replaces HG/T 20677-1990.
HG/T 20677-2013 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 531.1-2008 — Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
GB/T 1690-2006 — Liquid test methods vulcanized rubber or thermoplastic rubber resistance
GB/T 1696-2001 — Ebonite - Determination of cross breaking strength
GB/T 1697-2001 — Ebonite - Determination of impact strength
GB/T 1701-2001 — Ebonite - Determination of tensile strength and elongation at break
GB 1922
GB 3406
GB/T 7760-2003 — Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate-90 degrees peel method
GB/T 8923
GB/T 11211-2009 — Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method
GB 18241.1-2001 — Rubber lining - Part 1: Anticorrosion lining for equipment
GB 50236
HG/T 20569
HG/T 20592~20635
HG/T 20678
JB/T 4711-2003 — Coating and transport packaging of pressure vessels
4 Where this standard sits
It cites 18 standards, among them GB/T 528-2009, GB/T 531.1-2008, GB/T 1690-2006, listed in full above.
One other standard in this catalogue cites it: GB/T 42545-2023.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 51 pages
6 Related standards
Other editions:
HG/T 20677-1990 (earlier edition)
Standards on related subjects:
GB/T 23711.2-2019 — Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 22820-2024 — Engineering design specification for chemical safety instrumentation systems
HG/T 21633-2024 — Standard for Selection of fiber glass pipe and fitting
HG/T 22818-2022 — Code for design of integrated monitoring systems for rubber plants
7 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 94
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 51 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1-2008Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1690-2006Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 1696-2001Ebonite - Determination of cross breaking strength
- GB/T 1697-2001Ebonite - Determination of impact strength
Cited by
- GB/T 42545-2023General life cycle requirements for corrosion control of rubber lining engineering in nuclear power plant
- GB/T 18241.3-2018Rubber lining—Part 3: Rubber lining for floatation machine
- NB/T 25043.5-2016Technical specification for construction of nuclear power conventional island and balance of plant - Part 5: Water treatment and hydrogen generation systems
- HG/T 2951-2012Metal anode electrolyzers for the diaphragm process
- HG/T 4170-2011Steel chelating resin columns
Similar standards
Editions of HG/T 20677
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 20677-2013 | Design code for chemical equipment with rubber lining | current edition | Current |
| HG/T 20677-1990 | Design code for chemical equipment with rubber lining | previous edition | Superseded |
This page sells the current edition, HG/T 20677-2013. Earlier editions are listed for reference only.
How to Download HG/T 20677-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 20677-2013
$830.00